Convertible hydraulics question. Need help
#1
Convertible hydraulics question. Need help
Hello All...
This is for a 1990 XJS convertible...
I'm hoping someone will jump onto this thread and help me out... I had/have a leak in the convertible pump. I opened the pump and found the bad seal in the drive, replaced it. Don't know if that fixed the problem yet... I took 3 or 4 photos of the apparatus before taking it all apart BUT still, am having a hard time figuring out the correct way to reinstall/reassemble the hoses for the left and right hydraulic lifts... Yup,,, feeling a little dope-y...
My pictures show a tangle of hoses and I cant figure which goes where.
I have the 4 inlet/outlets. Upper and lower - on opposite sides of the pump framing. I cant determine which line goes where. Any help would be much appreciated...
This is for a 1990 XJS convertible...
I'm hoping someone will jump onto this thread and help me out... I had/have a leak in the convertible pump. I opened the pump and found the bad seal in the drive, replaced it. Don't know if that fixed the problem yet... I took 3 or 4 photos of the apparatus before taking it all apart BUT still, am having a hard time figuring out the correct way to reinstall/reassemble the hoses for the left and right hydraulic lifts... Yup,,, feeling a little dope-y...
My pictures show a tangle of hoses and I cant figure which goes where.
I have the 4 inlet/outlets. Upper and lower - on opposite sides of the pump framing. I cant determine which line goes where. Any help would be much appreciated...