XJS ( X27 ) 1975 - 1996 3.6 4.0 5.3 6.0

Locks wont work, can't get into the car

Thread Tools
 
Search this Thread
 
  #1  
Old 12-19-2016, 06:48 AM
Hitch's Avatar
Senior Member
Thread Starter
Join Date: Oct 2016
Location: Warrington, PA
Posts: 140
Received 15 Likes on 11 Posts
Default Locks wont work, can't get into the car

So I went out this morning to go to work. Hit the key fob and thought I heard the locks open. Doors still locked. Went to the other side. Door locked. Tried the key in the passenger side. Its just turns. Tried the key in the passenger side, same. The handle was a little strange on the drivers side the first time I tried it.

Maybe frozen since it was warm yesterday and below freezing now....Any other ideas?
 
  #2  
Old 12-19-2016, 06:51 AM
Vee's Avatar
Vee
Vee is offline
Veteran Member
Join Date: May 2010
Location: Arlington, VA
Posts: 4,819
Received 1,510 Likes on 1,176 Posts
Default

My locks freeze all the time. Just pour some hot water down the seam of the door.
 
The following users liked this post:
Hitch (12-19-2016)
  #3  
Old 12-19-2016, 02:05 PM
Hitch's Avatar
Senior Member
Thread Starter
Join Date: Oct 2016
Location: Warrington, PA
Posts: 140
Received 15 Likes on 11 Posts
Default

yup...just panicked.... all good
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:55 AM.