Evening all, I will be rebuilding my front and rear suspensions in the not too distant future on my v12. When I did this on my 4.0 I found a mixture of nut and bolt sizes and kept running out of the most common sizes. This was a really pain and wondered If anyone could recommend the most common sizes to stock up on and possible suppliers . Many thanks bob

 

Almost everything is UNF and 7/16 & 3/8 are the most common sizes.

 

Thankyou

 

There's a few 5/16 in there too.

 

The 3/8 and 7/16 are nylock nuts