OBD2 display in ashtray location
Senior Member
Joined: Mar 2017
Posts: 367
Likes: 180
From: West Midlands, UK
wsn03, you are good with where you are. If Bob has you listed, nothing else need be done until he contacts you for payment - he will give you instructions on how to PayPal him.
I have to run out right now, but there is a video from Bob on how to assemble the stuff he sends you and put it into the 3D printed case you are ordering. I'll try to find that video when I'm back.
I have to run out right now, but there is a video from Bob on how to assemble the stuff he sends you and put it into the 3D printed case you are ordering. I'll try to find that video when I'm back.
So I don't need to do anything now Bob has me on his list, all good.
I have ordered the 3d print and the ligher plug, and I'm about to order the Vgate OBDII diagnostic interface - is that it? I don't need to order all the other stuff on his website?
Senior Member
Joined: Mar 2017
Posts: 367
Likes: 180
From: West Midlands, UK
Video is here: https://www.youtube.com/watch?v=Qwx9...ature=youtu.be
Since I haven't done it yet, anyone who has could comment if there are any additional tips or tricks. I will mention that it took me a minute to wiggle out the existing ashtray insert to test fit the printed case. Kind of a 'duh' moment, but the insert was in there snuggly
CC
Since I haven't done it yet, anyone who has could comment if there are any additional tips or tricks. I will mention that it took me a minute to wiggle out the existing ashtray insert to test fit the printed case. Kind of a 'duh' moment, but the insert was in there snuggly
CC
Thread Starter
|
Senior Member
Joined: Apr 2020
Posts: 301
Likes: 316
From: Netherlands
Sorry for taking so long to get on with this - all this electronics stuff scares me! I'd be really happy to swap over someones upgrade Pedestrian Sensors in exchange for them doing this for me 
So far I managed to order the cigar-lighter. I have even figured out the 3D print!!! Still got a long way to go though
Been on the website and there is loads of items - so I got 2 questions
1. Do I buy everything listed there (I know I have to buy the Vgate OBDII diagnostic interface)? I am on Bob's list, so don't know what that means in terms of what I am getting versus all that stuff I don't understand
2. How do I sign up with Bob? I have been added to his list, is there something else I need to do?
Thank you
So far I managed to order the cigar-lighter. I have even figured out the 3D print!!! Still got a long way to go though
Been on the website and there is loads of items - so I got 2 questions
1. Do I buy everything listed there (I know I have to buy the Vgate OBDII diagnostic interface)? I am on Bob's list, so don't know what that means in terms of what I am getting versus all that stuff I don't understand
2. How do I sign up with Bob? I have been added to his list, is there something else I need to do?
Thank you
- Vgate OBD2 reader,
- 3D print (files are downloadable from my website)
- low profile USB charger
- electronics from me
The electronics will come pre-configured, so it'll be "plug and play" (sort of).
For anyone who is wondering what the status is of "round 3":
I'm still waiting for the delivery of the displays,
tracking info shows me that the status is "The item has been processed in the country of destination" since the 26th of November.
It looks to be stuck, so I ordered them again.
Delivery of the re-ordered items might take 4 weeks, so shipping out likely will not take place this year.
Last edited by Cabrio Bob; Dec 9, 2020 at 09:47 AM. Reason: tracking link was wrong
Senior Member
Joined: Mar 2017
Posts: 367
Likes: 180
From: West Midlands, UK
What you buy is (also see post #543):
- Vgate OBD2 reader,
- 3D print (files are downloadable from my website)
- low profile USB charger
- electronics from me
The electronics will come pre-configured, so it'll be "plug and play" (sort of).
For anyone who is wondering what the status is of "round 3":
I'm still waiting for the delivery of the displays,
tracking info shows me that the status is "The item has been processed in the country of destination" since the 26th of November.
It looks to be stuck, so I ordered them again.
Delivery of the re-ordered items might take 4 weeks, so shipping out likely will not take place this year.
- Vgate OBD2 reader,
- 3D print (files are downloadable from my website)
- low profile USB charger
- electronics from me
The electronics will come pre-configured, so it'll be "plug and play" (sort of).
For anyone who is wondering what the status is of "round 3":
I'm still waiting for the delivery of the displays,
tracking info shows me that the status is "The item has been processed in the country of destination" since the 26th of November.
It looks to be stuck, so I ordered them again.
Delivery of the re-ordered items might take 4 weeks, so shipping out likely will not take place this year.
Last edited by wsn03; Dec 9, 2020 at 01:27 PM.
Thread Starter
|
Senior Member
Joined: Apr 2020
Posts: 301
Likes: 316
From: Netherlands
I'm still waiting for the delivery of the displays,
3rd round shipment takes place somewhere in the coming week,
I'll send you a private message with details.
What you receive:
Spoiler
Last edited by Cabrio Bob; Dec 12, 2020 at 02:38 AM. Reason: added picture
Veteran Member
Joined: Jan 2018
Posts: 1,219
Likes: 691
From: Rockwall/Heath TX
I see your mini-plug is like mine and not mini enough to allow the ashtray lid to close... Anyone have a lead on a shorter one?
Thread Starter
|
Senior Member
Joined: Apr 2020
Posts: 301
Likes: 316
From: Netherlands
this one looks to be an US supplier for the same device. (out of stock?)
and another link
Senior Member
Joined: Oct 2018
Posts: 427
Likes: 426
From: Coatesville, PA
Senior Member
Joined: Oct 2018
Posts: 427
Likes: 426
From: Coatesville, PA
Senior Member
Joined: Sep 2019
Posts: 591
Likes: 470
From: Leicetershire, UK
Here are a few from Amazon:
They all look pretty similar...
Senior Member
Joined: Mar 2018
Posts: 221
Likes: 58
From: Danbury,Connecticut USA
I think that's a great idea. Since my XK8 assuming it can be adapted to this car, is so small inside, the loss of one vent wouldn't matter to me. Any improvement to monitor engine conditions is a good thing.
Mitch
Mitch