XK / XKR ( X150 ) 2006 - 2014
Sponsored by:
Sponsored by: DashLynx

Whistling noise driver side small window v annoying

Thread Tools
 
Search this Thread
 
  #1  
Old 08-04-2017, 10:28 AM
Boistrous4's Avatar
Junior Member
Thread Starter
Join Date: Feb 2017
Location: Hull
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Whistling noise driver side small window v annoying

First photo is passenger side rubber is over the glass covering it on the second photo rubber is under the glass with the window exposed is this correct ??
 
  #2  
Old 08-04-2017, 03:46 PM
Mandrake's Avatar
Senior Member
Join Date: May 2017
Location: South Ogden, UT
Posts: 426
Received 276 Likes on 139 Posts
Default

First picture is how mine are. I have the whistling too, but haven't had time to dig into it yet.
 
  #3  
Old 08-04-2017, 06:02 PM
McJag222's Avatar
Veteran Member
Join Date: Jul 2016
Location: Vancouver BC
Posts: 1,003
Received 474 Likes on 312 Posts
Default

I sometimes hear a groaning from the passenger side...
 
  #4  
Old 08-04-2017, 06:10 PM
McJag222's Avatar
Veteran Member
Join Date: Jul 2016
Location: Vancouver BC
Posts: 1,003
Received 474 Likes on 312 Posts
Default

This is mine - whistle free:





 
  #5  
Old 08-04-2017, 09:22 PM
pk4144's Avatar
Veteran Member
Join Date: Mar 2015
Location: Los Angeles
Posts: 1,371
Received 560 Likes on 314 Posts
Default

I'd first assume/ask: you are in England, and have a right-side drive car, yes? So your over-the-shoulder whistle is on your RIGHT?
Reason I ask: I've had the annoying over the driver's shoulder whistle (and I've had two XK's and they BOTH had the issue), over and behind my LEFT shoulder. On mine, however, the "pitch" of the whistling noise goes up or down if I turn the climate-control fan up or down. I always assumed it's coming from some vent or ductwork in a hard-to-access area. I've just gotten used to it.
 
  #6  
Old 08-05-2017, 08:13 AM
Boistrous4's Avatar
Junior Member
Thread Starter
Join Date: Feb 2017
Location: Hull
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Wondered why both sides are finished differently surely they should be the same ?
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:25 PM.