Greetings all,

I have been looking through the workshop manual regarding window adjustments. I understand there are 4 screws that pertain to the adjustment. The 4mm and 5mm.

Please help me understand the effect the 4mm screws have on the adjustment. I have spent several hours trying various configurations and I am so close to a good allignment and seal. Right now the seal is only a few mm to far from the rubber.

Thanks

 

Anyone?

 

Joshua,

Welcome to the Forum. You'll find lots of helpful members here with a wealth of information. I think the lack of replies might be because you didn't state your year, model, and location. You may want to add that to your signature. And be sure to post some pix of your ride.

Since you're a newbie, get to learn the search function. Because this Forum has matured (almost 10 years old), lots of questions have already been asked and answered.

Click this link: https://www.jaguarforums.com/forum/x...stment-117804/ As a last resort, there's always the dealer. The OP was in the UK; note that it's confusing that the first model year for the X150 was 2006 in the UK and 2007 in the USA.
Hopefully, this will help. If so, please press at the bottom right.

Stuart