XK8 / XKR ( X100 ) 1996 - 2006

window rubber refurb

Old Oct 9, 2013 | 05:43 AM
  #1  
tberry6686's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2012
Posts: 223
Likes: 34
From: UK
Default window rubber refurb

Hi Guys

The door trims at the windows on my XK8 conv need refurbed. the rubber is being pushed out fromthe metal piece by what appears to be corrosion (white hard substance). is there any way of removing the rubber so I can get rid of this corrosion and the re-attach the rubber to the metal.

Have been looking for replacements on ebay but they seem to be rare.
 

Last edited by GGG; Oct 9, 2013 at 05:52 AM.
Reply
Old Oct 9, 2013 | 05:52 AM
  #2  
GGG's Avatar
GGG
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2011
Posts: 120,439
Likes: 17,009
From: Durham, UK
Default

You'll see I've edited your post. The difficulty in locating replacements was probably due to your description of their scarcity.

Try this thread:

https://www.jaguarforums.com/forum/x...rim-faq-55561/

Keith had a good result with the Dorchester Gray trim on his XK8 4.0 litre and I did with the Satin Black ones on my XK8 4.2.

Graham
 
Reply
Old Oct 9, 2013 | 06:53 AM
  #3  
tberry6686's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2012
Posts: 223
Likes: 34
From: UK
Default

Thanks for that. I have looked at that thread but my problem is actually the rubber part being pushed off the metal by what appears to be corrosion of some form. This is making it impossible to close the window without pushing the trim piece off the door.

I'll try and get a photo of what I mean later when I'm at home.
 
Reply
Old Oct 9, 2013 | 07:20 AM
  #4  
renaultvation's Avatar
Senior Member
Joined: Apr 2011
Posts: 234
Likes: 48
From: England
Default

This is a repair that I have undertaken, however, I suspect that I have just bought time rather than effected a permanent cure. The problem is that the rubber is bonded to the metal and the metal corrodes and expands, turning to dust. I carried out the repair by peeling away as much of the rubber from the corroded metal as possible, then remove as much corrosion as possible. When the trims had been repainted, I bonded the rubber back to the metal (or what remained of it), using an impact adhesive.

You can see the process and results at: https://www.jaguarforums.com/forum/x...al-trim-99953/
 
Reply
Old Oct 9, 2013 | 07:47 AM
  #5  
tberry6686's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2012
Posts: 223
Likes: 34
From: UK
Default

yep thats exactly the problem I have. the metal trim actually appears to be in good shape with only one small spot of bubbling on the passenger side, but the rubber parts rea being pushed off virtually all the way along so really need to take off the rubber and clean up the metal before re-attaching.

Issue is in a few places the rubber is very securely attached and I was hoping there was an easy (ish) way of getting the rubber off.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bdboyle
XJ XJ8 / XJR ( X308 )
12
Sep 16, 2019 05:58 PM
NTL1991
XJ40 ( XJ81 )
3
May 1, 2017 07:54 AM
Buckingham
F-Type ( X152 )
58
Jul 6, 2016 11:09 AM
Dave1109971
XJS ( X27 )
52
Dec 15, 2015 06:16 PM
ziondio
New Member Area - Intro a MUST
10
Oct 1, 2015 01:48 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:09 PM.