Jaguar Forums - Jaguar Enthusiasts Forum
Share Your Pictures with Our Community. Upload Now
0 2023/01/28 19:20:48
0 2023/01/28 19:20:12
0 2023/01/28 19:19:34
0 2023/01/28 19:18:53
0 2023/01/28 19:17:47
Seat control switch panel removal
Seat control switch panel removal
0 2023/01/28 19:14:06
0 2023/01/28 19:03:28
0 2023/01/28 18:21:40
0 2023/01/28 18:21:38
0 2023/01/28 18:21:35
0 2023/01/28 18:21:32
0 2023/01/28 18:21:28
Advertisement
0 2023/01/28 16:38:13
0 2023/01/28 16:37:29
0 2023/01/28 16:30:57
0 2023/01/28 16:30:39
0 2023/01/28 16:30:14
0 2023/01/28 16:26:01
And I bought the cable (speaker cable) in a local hardware shop. These are 30m 18GA cable, about 1mm diameter
And I bought the cable (speaker cable) in a local hardware shop. These are 30m 18GA cable, about 1mm diameter
0 2023/01/28 16:20:05
Most two pin connectors would probably do. Those here come in a lot of 20 pieces (Aliexpress), but you can also find smaller quantities. As you can see, the connectors come in the shape of a puzzle (see box in background). I used those connectors.
Most two pin connectors would probably do. Those here come in a lot of 20 pieces (Aliexpress), but you can also find smaller quantities. As you can see, the connectors come in the shape of a puzzle (see box in background). I used those connectors.
0 2023/01/28 15:57:30
I took a picture for you of the box inside where I connected one cable with a lug.
I took a picture for you of the box inside where I connected one cable with a lug.
0 2023/01/28 15:57:29
I added extra cable splice-offs off the crocodile clamps and one end of that connector goes to the end of the cables. Note that you have to ensure that the crocodile clamps are fixated when you use the connector end instead to ensure that those to not touch (fire danger!) I always clamp them onto the fat outgoing cable of the charger. This is my 15A CTEK charger. And I have to correct myself: my other CTEK has just 5A, not 7A, so 5A is still just OK for Jaguar batteries, but 7A would be better.
I added extra cable splice-offs off the crocodile clamps and one end of that connector goes to the end of the cables. Note that you have to ensure that the crocodile clamps are fixated when you use the connector end instead to ensure that those to not touch (fire danger!) I always clamp them onto the fat outgoing cable of the charger. This is my 15A CTEK charger. And I have to correct myself: my other CTEK has just 5A, not 7A, so 5A is still just OK for Jaguar batteries, but 7A would be better.
0 2023/01/28 15:57:27
These are the fuse holders (on Aliexpress). I went for the holders for the bigger blades (Medium), and you have to select the cable size of that holder: 12, 14 or 16 AWG: The bigger that number, the smaller the x-section. 16 AWD is about 1.3mm diameter, 12 AWG about 2mm and 14 AWG about 1.6mm, and good for about up to 20 or 30A. Maybe go with 14 AWG
These are the fuse holders (on Aliexpress). I went for the holders for the bigger blades (Medium), and you have to select the cable size of that holder: 12, 14 or 16 AWG: The bigger that number, the smaller the x-section. 16 AWD is about 1.3mm diameter, 12 AWG about 2mm and 14 AWG about 1.6mm, and good for about up to 20 or 30A. Maybe go with 14 AWG
0 2023/01/28 15:57:24
0 2023/01/28 15:55:38
Ggggggorgeous :-)
Ggggggorgeous :-)
0 2023/01/28 15:54:25
0 2023/01/28 15:50:27
Removing the gasket..
Removing the gasket..
0 2023/01/28 15:06:34
very dead!
very dead!
0 2023/01/28 14:59:25
If it were a real hinge, be easier, but then, it wouldn't be a hand built British marvel...
If it were a real hinge, be easier, but then, it wouldn't be a hand built British marvel...
0 2023/01/28 14:57:37
0 2023/01/28 14:34:28
0 2023/01/28 14:31:41
0 2023/01/28 14:31:39
Advertisement