Jaguar Forums - Jaguar Enthusiasts Forum
Share Your Pictures with Our Community. Upload Now
0 2022/12/22 07:49:36
0 2022/12/22 07:28:43
0 2022/12/22 07:05:03
2015 F-Type
2015 F-Type
0 2022/12/22 07:03:38
0 2022/12/22 05:51:17
0 2022/12/22 05:51:16
0 2022/12/22 05:51:14
0 2022/12/22 05:44:31
0 2022/12/22 05:44:29
0 2022/12/22 05:44:26
Max opening is diameter 74mm
Max opening is diameter 74mm
0 2022/12/22 05:30:02
0 2022/12/22 05:30:01
Advertisement
0 2022/12/22 05:30:00
0 2022/12/22 05:29:58
The outside dimensions of the Aluminium body and stowed Arms is the same as the plastic it replaced. Therefor, the cupholder closes fully in exactly the same way.
The outside dimensions of the Aluminium body and stowed Arms is the same as the plastic it replaced. Therefor, the cupholder closes fully in exactly the same way.
0 2022/12/22 05:29:57
0 2022/12/22 05:29:55
0 2022/12/22 05:29:53
0 2022/12/22 05:29:51
0 2022/12/22 05:29:49
0 2022/12/22 05:29:46
0 2022/12/22 05:29:45
The white hatched areas need to be trimmed away from the plastic housing to enable the new Arms to clear when closing/opening.
The white hatched areas need to be trimmed away from the plastic housing to enable the new Arms to clear when closing/opening.
0 2022/12/22 05:29:42
Underside of arm action showing hinge profile that limits swing arc giving min -to- max clamp range of 45mm -to- 74mm cup OD.
Underside of arm action showing hinge profile that limits swing arc giving min -to- max clamp range of 45mm -to- 74mm cup OD.
0 2022/12/22 05:29:41
The existing torsion springs can sometimes prove to be too old or tired and so new replacements will be required.
The existing torsion springs can sometimes prove to be too old or tired and so new replacements will be required.
0 2022/12/22 05:29:40
The existing torsion springs can sometimes prove to be too old or weak and so new replacements will be required.
The existing torsion springs can sometimes prove to be too old or weak and so new replacements will be required.
0 2022/12/22 05:29:40
0 2022/12/22 05:29:39
0 2022/12/22 05:29:38
0 2022/12/22 05:29:37
The dia 4mm hole position relative to the 6mm corner is critical to keep maximum arm opening to full round. Notice the 18.9mm length is correct on STEP and STL files but this dimension is not shown on pdf drawing.
The dia 4mm hole position relative to the 6mm corner is critical to keep maximum arm opening to full round. Notice the 18.9mm length is correct on STEP and STL files but this dimension is not shown on pdf drawing.
0 2022/12/22 05:29:37
0 2022/12/22 05:29:36
0 2022/12/22 05:29:35
The Arm hinge profile protrudes when stowed, so a small clearance needs to be cut out of the plastic on both sides - see other pic.
The Arm hinge profile protrudes when stowed, so a small clearance needs to be cut out of the plastic on both sides - see other pic.
0 2022/12/22 05:29:34
Advertisement