Jaguar Forums - Jaguar Enthusiasts Forum
Share Your Pictures with Our Community. Upload Now
SB Chevy 350 B&M 250 blower, dual 750 cfm Holley carbs and snorkel... wife really really wanted it gone..... I had a fleeting thought of putting into the xj6 but I couldnt bring myself to molesting the car like that
SB Chevy 350 B&M 250 blower, dual 750 cfm Holley carbs and snorkel... wife really really wanted it gone..... I had a fleeting thought of putting into the xj6 but I couldnt bring myself to molesting the car like that
0 2011/01/27 05:44:17
ok these are the wheels I will be either polishing and repainting or chrome them. I checked into some chrome kits and at over 1k for the materials I might have to send them off to someone else. But I will try the polish first.
ok these are the wheels I will be either polishing and repainting or chrome them. I checked into some chrome kits and at over 1k for the materials I might have to send them off to someone else. But I will try the polish first.
0 2011/01/27 05:44:17
no touch car wash, not recommended for freezing weather. I was stuck in the car after a wash.... had to go back and run it through again afterwards and wipe down door jams
no touch car wash, not recommended for freezing weather. I was stuck in the car after a wash.... had to go back and run it through again afterwards and wipe down door jams
0 2011/01/27 05:34:17
and this is where a working water pump needs to be
and this is where a working water pump needs to be
0 2011/01/27 05:34:17
Leaks as much as BP with 20 year old gaskets. Now ... zero LEAKS! from top to bottom!
Leaks as much as BP with 20 year old gaskets. Now ... zero LEAKS! from top to bottom!
0 2011/01/27 05:34:17
day 1 after 6 weeks of interior work. I was not able to remove driver seat to install the new fabric. I still have no clue how to reach all the bolts on the drivers seat! This was covered in place with a fair amount of cursing
day 1 after 6 weeks of interior work. I was not able to remove driver seat to install the new fabric. I still have no clue how to reach all the bolts on the drivers seat! This was covered in place with a fair amount of cursing
0 2011/01/27 05:25:21
I went with the 'burl wood grain pleather" ... added 3/4" med density foam
I went with the 'burl wood grain pleather" ... added 3/4" med density foam
0 2011/01/27 05:25:21
batt charger was used during water pump replacement so I could listen to the radio... also during this event, replacement of valve cover gaskets, semi - removale of rack in pinion to replace oil pan gasket and rear main seal.
batt charger was used during water pump replacement so I could listen to the radio... also during this event, replacement of valve cover gaskets, semi - removale of rack in pinion to replace oil pan gasket and rear main seal.
0 2011/01/27 05:25:21
photo shop fun
photo shop fun
0 2011/01/27 05:23:31
day after repainting
day after repainting
0 2011/01/27 05:23:31
the new seats, burl wood grain inserts and black piping since most of the car is trimmed out in black
the new seats, burl wood grain inserts and black piping since most of the car is trimmed out in black
0 2011/01/27 05:23:31
0 2011/01/27 04:39:34
Advertisement
0 2011/01/27 04:38:38
0 2011/01/27 04:38:38
0 2011/01/27 04:38:38
Rear Bumper
Rear Bumper
0 2011/01/26 12:50:04
0 2011/01/25 20:05:56
0 2011/01/25 20:05:56
0 2011/01/25 20:05:56
IMG 0650
IMG 0650
0 2011/01/25 20:01:35
Track car interior (unfinished)
Track car interior (unfinished)
0 2011/01/24 12:21:53
Track engine
Track engine
0 2011/01/24 12:21:53
1 2011/01/23 13:29:04
0 2011/01/23 13:29:04
Pic 10
Pic 10
0 2011/01/22 16:45:44
Pic 7
Pic 7
0 2011/01/22 16:45:24
Pic 8
Pic 8
0 2011/01/22 16:45:24
Pic 9
Pic 9
0 2011/01/22 16:45:24
Pic 4
Pic 4
0 2011/01/22 16:42:35
Pic 5
Pic 5
0 2011/01/22 16:42:35
Pic 6
Pic 6
0 2011/01/22 16:42:35
pic 1
pic 1
0 2011/01/22 16:40:54
Advertisement