Jaguar Forums - Jaguar Enthusiasts Forum
E Type inlet shortended and welded up where heater could be plumbed in
E Type inlet shortended and welded up where heater could be plumbed in
0 2024/10/11 08:32:20
0 2024/10/03 22:46:50
0 2024/10/03 22:44:33
0 2024/09/16 09:10:21
0 2024/09/16 09:10:17
0 2024/09/16 09:10:13
0 2024/09/16 09:08:49
0 2024/09/07 23:27:13
0 2024/09/07 23:25:46
0 2024/08/22 06:52:58
0 2024/08/21 05:42:25
0 2024/08/21 05:42:19
0 2024/08/21 05:42:12
You can see that this pipe connects the thermostat housings to the water pump
You can see that this pipe connects the thermostat housings to the water pump
0 2024/08/20 09:40:25
0 2024/08/17 11:18:11
0 2024/08/17 05:14:13
No unsightly kickdown plate, all adjusted and ready to road test.
No unsightly kickdown plate, all adjusted and ready to road test.
0 2024/08/17 05:14:07
0 2024/08/17 05:11:41
0 2024/08/17 05:11:35
This is the old cable, but the point is that you MUST thread on the topmost of the fixing nuts BEFORE threading the cable through the bracket.
This is the old cable, but the point is that you MUST thread on the topmost of the fixing nuts BEFORE threading the cable through the bracket.
0 2024/08/17 05:00:22
0 2024/08/17 05:00:05
0 2024/08/17 04:51:32
The outer bracket is easily seen, and the sleeve and split pin that secures the sleeve over the ball end of the inner, thus ensuring the ball stays in its detente in the pedal
The outer bracket is easily seen, and the sleeve and split pin that secures the sleeve over the ball end of the inner, thus ensuring the ball stays in its detente in the pedal
0 2024/08/17 04:37:40
Capstan end: Barrel fitting and threaded outer. No cable-based kickdown mechanism needed, see link at top of this post.
Capstan end: Barrel fitting and threaded outer. No cable-based kickdown mechanism needed, see link at top of this post.
0 2024/08/16 06:55:29
Pedal end: ball fitting and threaded outer.
Pedal end: ball fitting and threaded outer.
0 2024/08/16 06:55:22
Inner length overall 120cm. Outer LOA 106cm. Therefore the INNER must have 14cm showing outside the inner.
Inner length overall 120cm. Outer LOA 106cm. Therefore the INNER must have 14cm showing outside the inner.
0 2024/08/16 06:55:15
Blue circles: barrel shaped endpiece in capstan, adjustable threaded outer in bracket. orange circle shows the pickdown mechanism which is part of the pre facelift throttle cable.
Blue circles: barrel shaped endpiece in capstan, adjustable threaded outer in bracket. orange circle shows the pickdown mechanism which is part of the pre facelift throttle cable.
0 2024/08/16 06:18:58
1mm ground off lower corners
1mm ground off lower corners
0 2024/08/10 06:14:36
This is injector A1 on my spare engine. Note collar indent and connector facing forward (to the right in the photo). Note fixing holes are outboard of the rail. If making up a complete replacement rail and injectors as I am, the correct orientation of the fixing collars is vital.
This is injector A1 on my spare engine. Note collar indent and connector facing forward (to the right in the photo). Note fixing holes are outboard of the rail. If making up a complete replacement rail and injectors as I am, the correct orientation of the fixing collars is vital.
0 2024/08/10 06:04:40
Closeup of Oetiker clip on the hose
Closeup of Oetiker clip on the hose
0 2024/08/10 05:49:17
All done
All done
0 2024/08/10 05:48:54
A bank done
A bank done
0 2024/08/10 05:48:49
Injectors installed with clips. Note that the second injector has no clip at the injector end of the hose because it is a new one and came with the hose already fitted to a non-adjuste barb.
Injectors installed with clips. Note that the second injector has no clip at the injector end of the hose because it is a new one and came with the hose already fitted to a non-adjuste barb.
0 2024/08/10 05:43:58
Oetiker clip and tool
Oetiker clip and tool
0 2024/08/10 05:42:58
Knipex hose cutting too from Amazon, indespensable if shortening the hoses: https://www.amazon.fr/dp/B005EXOOGO?ref=ppx_yo2ov_dt_b_product_details&th=1
Knipex hose cutting too from Amazon, indespensable if shortening the hoses: https://www.amazon.fr/dp/B005EXOOGO?ref=ppx_yo2ov_dt_b_product_details&th=1
0 2024/08/10 05:24:43
Yellow line hose standard length of 50mm. Blue line reduced hose length by 12mm to 38mm.
Yellow line hose standard length of 50mm. Blue line reduced hose length by 12mm to 38mm.
0 2024/08/10 05:20:30
0 2024/08/10 04:58:57
0 2024/08/10 04:56:02
0 2024/08/10 04:55:56
0 2024/08/07 09:03:53