Jaguar Forums - Jaguar Enthusiasts Forum
Catsellated nuts marked in brown, the other end of the fulcrum pin in red. NOTE the subframe has to be swung down and the steering rack removed to renew the pins and bushes
Catsellated nuts marked in brown, the other end of the fulcrum pin in red. NOTE the subframe has to be swung down and the steering rack removed to renew the pins and bushes
0 2024/03/27 11:19:33
0 2024/03/27 11:19:38
0 2024/03/27 11:19:43
0 2024/03/27 11:24:43
0 2024/03/27 11:24:49
0 2024/03/27 11:24:54
0 2024/03/27 11:24:59
0 2024/03/27 11:25:06
0 2024/03/27 11:25:12
Split pin in place
Split pin in place
0 2024/03/27 11:41:39
0 2024/03/27 23:51:41
0 2024/03/27 23:51:47
0 2024/03/27 23:51:51
0 2024/03/29 04:28:08
0 2024/03/29 04:28:13
0 2024/03/29 04:28:18
0 2024/03/29 04:43:34
0 2024/03/29 04:45:14
0 2024/03/29 04:49:10
Red line points to the circlip. Blue line points to the wavy washer. Green line points to the U shaped sprung clip. Yellow line points to the 12 pointed star.
Red line points to the circlip. Blue line points to the wavy washer. Green line points to the U shaped sprung clip. Yellow line points to the 12 pointed star.
0 2024/03/29 04:55:28
Blue rings round the capsta and the accelerator cable placed out of the way. The TPS under the capstan is still plugged into the loom.
Blue rings round the capsta and the accelerator cable placed out of the way. The TPS under the capstan is still plugged into the loom.
0 2024/03/29 05:28:00
This shows the three starwheel fixings in closeup. The red mark shows the magnetic pickup that activates the coil when the points of the starwheel rotate past it. This process is called (I am told) the Hall Effect, named after the guy who discovered it.
This shows the three starwheel fixings in closeup. The red mark shows the magnetic pickup that activates the coil when the points of the starwheel rotate past it. This process is called (I am told) the Hall Effect, named after the guy who discovered it.
0 2024/03/29 05:34:39
0 2024/03/29 05:40:31
You can see the clip is locking the starwheel to the column
You can see the clip is locking the starwheel to the column
0 2024/03/29 05:45:57
U shaped clip removed
U shaped clip removed
0 2024/03/29 05:47:17
The starwheel can now be carefully pulled up and off the comumn. It is BRITTLE so use FINGERS ONLY and place in a plastic container
The starwheel can now be carefully pulled up and off the comumn. It is BRITTLE so use FINGERS ONLY and place in a plastic container
0 2024/03/29 05:47:21
Blue line shows the vac capsule. red rings show the two pozi screws that hold the pickup assmebly to the dizzy chassis.
Blue line shows the vac capsule. red rings show the two pozi screws that hold the pickup assmebly to the dizzy chassis.
0 2024/03/29 05:52:54
Loosen screws with a driver and then undo and remove by hand. Do NOT lose these!
Loosen screws with a driver and then undo and remove by hand. Do NOT lose these!
0 2024/03/29 06:00:12
Peg on the underside of the pickup unit and hole in the arm for the peg ringed in blue.
Peg on the underside of the pickup unit and hole in the arm for the peg ringed in blue.
0 2024/03/29 06:02:13
Drive out the fixing pin (or undo the self-tapper and the old vac unit can be pulld out of the dizzy chassis.
Drive out the fixing pin (or undo the self-tapper and the old vac unit can be pulld out of the dizzy chassis.
0 2024/03/29 06:06:29
0 2024/03/29 06:06:34
New vac unit in place and fixing screw (or rollpin) ready to be tightended
New vac unit in place and fixing screw (or rollpin) ready to be tightended
0 2024/03/29 06:09:44
close up of the pickup underside showing the peg that MUST be engaged pointing downwards through the hole in the end of the arm.
close up of the pickup underside showing the peg that MUST be engaged pointing downwards through the hole in the end of the arm.
0 2024/03/29 06:09:50
0 2024/03/29 06:13:33
0 2024/03/29 06:17:18
The arm of the pickup marked in red is articulated and must be placed in position before the fixing screw is replaced
The arm of the pickup marked in red is articulated and must be placed in position before the fixing screw is replaced
0 2024/03/29 06:21:48
U clip in pliers ready to be replaced
U clip in pliers ready to be replaced
0 2024/03/29 06:26:46
Once in place, press fully home with a screwdriver to lock the starwheel to the column
Once in place, press fully home with a screwdriver to lock the starwheel to the column
0 2024/03/29 06:26:52
0 2024/03/29 06:26:57
pushing the circlip fully home so it clicks into the groove in the column
pushing the circlip fully home so it clicks into the groove in the column
0 2024/03/29 06:31:07