Jaguar Forums - Jaguar Enthusiasts Forum
Wire Coat hanger stretched out with the hook bent back
Wire Coat hanger stretched out with the hook bent back
0 2018/12/15 12:23:23
Flattened hook to allow it to slide under the clip by pulling
Flattened hook to allow it to slide under the clip by pulling
0 2018/12/15 12:23:34
Clip lifted by pulling on the strut. (Shown on the replacement)
Clip lifted by pulling on the strut. (Shown on the replacement)
0 2018/12/15 12:23:42
Close up of the hook after sanding flat to hook under the clip
Close up of the hook after sanding flat to hook under the clip
0 2018/12/15 12:31:51
Flattened wire clothes hanger with the hook bent at the end
Flattened wire clothes hanger with the hook bent at the end
0 2018/12/15 12:31:51
Close up of the lifed clip
Close up of the lifed clip
0 2018/12/15 12:31:51
Strut clip lifted by pulling the hook under. This works from the other end with limited access.
Strut clip lifted by pulling the hook under. This works from the other end with limited access.
0 2018/12/15 12:31:51
Sanded down hook to slide under the clip
Sanded down hook to slide under the clip
0 2018/12/15 12:34:57
Lifted clip close up
Lifted clip close up
0 2018/12/15 12:34:57
Flattened wire clothes hanger
Flattened wire clothes hanger
0 2018/12/15 12:34:57
Clip lifted. Works from the other end with limited access
Clip lifted. Works from the other end with limited access
0 2018/12/15 12:34:57
0 2018/12/15 12:37:18
0 2018/12/15 12:37:18
0 2018/12/15 12:37:18
0 2018/12/15 12:37:18
Flattened wire clothes hanger
Flattened wire clothes hanger
0 2018/12/15 12:37:52
Wire hanger stretched out
Wire hanger stretched out
0 2018/12/15 12:39:47
The unit before opening
The unit before opening
0 2019/03/15 11:38:50
Pressed bolt shaft ends before drilling
Pressed bolt shaft ends before drilling
0 2019/03/15 11:39:25
Pressed bolt shaft ends after drilling
Pressed bolt shaft ends after drilling
0 2019/03/15 11:40:03
Unit opened
Unit opened
0 2019/03/15 11:40:30
The joints didn't look too bad before cleaning and soldering
The joints didn't look too bad before cleaning and soldering
0 2019/03/15 11:41:01
After resoldering
After resoldering
0 2019/03/15 11:42:11
Resistance on the power connectors after soldering
Resistance on the power connectors after soldering
0 2019/03/15 11:43:22
Power connectors
Power connectors
0 2019/03/15 11:44:06
Re-sealed using epoxy
Re-sealed using epoxy
0 2019/03/15 11:44:36
Unit before opening
Unit before opening
0 2019/03/15 11:45:38
Testing resistance to the power connectors
Testing resistance to the power connectors
0 2019/03/15 11:45:41
Resistance to the connectors (182.2k Ohms)
Resistance to the connectors (182.2k Ohms)
0 2019/03/15 11:45:45
After re-soldering
After re-soldering
0 2019/03/15 11:45:49
Some extra solder (probably more for my peace of mmind
Some extra solder (probably more for my peace of mmind
0 2019/03/15 11:45:52
power joints before cleaning
power joints before cleaning
0 2019/03/15 11:45:55
Unit opened
Unit opened
0 2019/03/15 11:45:59
Bolt shafts after drilling
Bolt shafts after drilling
0 2019/03/15 11:46:02
Bolt Shafts before drilling
Bolt Shafts before drilling
0 2019/03/15 11:46:05
Ready for surgery
Ready for surgery
0 2019/03/15 11:46:09
0 2019/05/18 14:03:27
0 2019/05/18 14:04:05
0 2019/05/18 14:09:34
Bicycle innter tube seems to have the right amount of flex
Bicycle innter tube seems to have the right amount of flex
0 2020/04/05 17:00:53