Jaguar Forums - Jaguar Enthusiasts Forum
0 2019/03/19 16:38:46
0 2019/03/19 16:40:03
0 2019/03/19 16:40:58
0 2019/03/19 16:41:43
0 2019/08/02 15:15:02
0 2019/08/02 15:22:22
0 2019/08/16 15:32:35
I left the car out in the sun yesterday it was 91 degrees. The temperature ended up being right around 85 which is the exact temperature you want to keep the bottle at at all times for your 950 PSI so I would say the bottle will never get that hot if I leave it in the car all the time so that worry is over.. today it's only supposed to be 78 and sunny I'm going to leave it outside and check the temperature again. Also going to put the pressure gauge in the car so I know the temp and psi
I left the car out in the sun yesterday it was 91 degrees. The temperature ended up being right around 85 which is the exact temperature you want to keep the bottle at at all times for your 950 PSI so I would say the bottle will never get that hot if I leave it in the car all the time so that worry is over.. today it's only supposed to be 78 and sunny I'm going to leave it outside and check the temperature again. Also going to put the pressure gauge in the car so I know the temp and psi
0 2019/08/23 04:39:24
0 2019/10/12 09:10:53
0 2019/10/12 09:16:07
0 2019/10/12 09:19:35
0 2019/10/18 14:54:46
0 2019/10/18 14:56:02
0 2019/10/18 14:57:01
0 2020/05/07 09:15:38
0 2020/05/23 15:36:46
0 2020/05/23 15:37:57
0 2020/05/23 15:38:58
0 2020/05/23 15:39:58
0 2020/05/23 15:41:10
0 2020/05/23 15:42:13
0 2020/05/23 15:43:23
0 2020/05/27 09:58:05
Debadging complete
Debadging complete
0 2020/05/30 10:09:43
0 2020/05/30 10:11:34
0 2020/08/09 15:20:23
Here you go...
Here you go...
0 2020/08/12 20:45:39
0 2020/08/12 20:47:26
Even on black it looks horrible
Even on black it looks horrible
0 2020/08/14 18:04:37
0 2020/08/15 05:52:32
Took about 2 hours to do everything which includes this part the one over the glove box and the power window switches super easy reversible there's no glue it just peels right off and leave no residue
Took about 2 hours to do everything which includes this part the one over the glove box and the power window switches super easy reversible there's no glue it just peels right off and leave no residue
0 2020/08/16 12:03:36
0 2020/08/16 12:07:38
0 2020/08/16 12:12:32
0 2020/08/17 06:58:27
0 2020/08/25 17:59:47
0 2020/08/25 18:02:11
Jazzy I have basically the same set up as you. Curious were you able to weld in the bung for the sensor without removing the exhaust? Also what are your afr's spraying 125? Thanks
Jazzy I have basically the same set up as you. Curious were you able to weld in the bung for the sensor without removing the exhaust? Also what are your afr's spraying 125? Thanks
0 2020/08/30 11:45:43
Button is purge... second is arm system... third as the bottle heater... 4th is bottle open and close
Button is purge... second is arm system... third as the bottle heater... 4th is bottle open and close
0 2020/08/31 15:54:57
Nitrous purges by wipers
Nitrous purges by wipers
0 2020/08/31 15:59:39
0 2020/09/25 11:19:42