Jaguar Forums - Jaguar Enthusiasts Forum
0 2025/08/09 05:52:10
Wire brushed. Etch primed. Enamel top coat
Wire brushed. Etch primed. Enamel top coat
0 2020/05/24 03:42:29
Beam support engine to drop subframe
Beam support engine to drop subframe
0 2020/05/24 03:42:06
0 2025/08/09 05:57:42
Finished front suspension
Finished front suspension
0 2020/05/24 03:42:14
0 2025/08/09 06:01:37
0 2025/08/09 06:03:16
Upper wishbone pivots with differing washers on each side. Polybushed
Upper wishbone pivots with differing washers on each side. Polybushed
0 2020/05/26 01:49:50
Front subframe bracket. Zinc primer. 2-Part epoxy mastic topcoat.
Front subframe bracket. Zinc primer. 2-Part epoxy mastic topcoat.
0 2020/05/24 03:42:28
0 2025/08/09 06:03:17
Oil cooler bracket. Zinc primer. 2-Part epoxy mastic topcoat. new instrumounts
Oil cooler bracket. Zinc primer. 2-Part epoxy mastic topcoat. new instrumounts
0 2020/05/24 03:42:16
0 2025/08/09 06:03:19
Finished front suspension
Finished front suspension
0 2020/05/24 03:42:23
Wire brushed. Etch primed. Enamel top coat
Wire brushed. Etch primed. Enamel top coat
0 2020/05/24 03:42:25
Spring and CATS Damper recoated with engine enamel. New Bush
Spring and CATS Damper recoated with engine enamel. New Bush
0 2020/05/26 01:44:47
Spring shotblast and recoated with Zinc primer and engine enamel.
Spring shotblast and recoated with Zinc primer and engine enamel.
0 2020/05/24 03:42:21
Zinc primer. 2-Part epoxy mastic topcoat. ABS Reluctors will need replacing but not yet !
Zinc primer. 2-Part epoxy mastic topcoat. ABS Reluctors will need replacing but not yet !
0 2020/05/24 05:00:40
Front subframe bracket. Zinc primer. 2-Part epoxy mastic topcoat.
Front subframe bracket. Zinc primer. 2-Part epoxy mastic topcoat.
0 2020/05/24 03:42:26
New Vee-mounts. Etch primed. Enamel top coat. New mounts are not coated because it inhibits the rubber bonding - strongly recommend extra protection before fitting.
New Vee-mounts. Etch primed. Enamel top coat. New mounts are not coated because it inhibits the rubber bonding - strongly recommend extra protection before fitting.
0 2020/05/24 05:00:42
Subframe ready to raise. New Vee Mounts. refurbed front bushes. Sway bar and brackets recoated and Polybushed.
Subframe ready to raise. New Vee Mounts. refurbed front bushes. Sway bar and brackets recoated and Polybushed.
0 2020/05/24 05:00:44
Upper wishbone wire brushed. Ball joints OK. Zinc primer plus 2-part epoxy mastic top coat
Upper wishbone wire brushed. Ball joints OK. Zinc primer plus 2-part epoxy mastic top coat
0 2020/05/26 01:44:48
Lower wishbones with new ball joints. These take all the weight of the car and tend to go before the upper ball joints. Wire brushed and coated with Zinc primer. 2-Part epoxy mastic topcoat. Polybushed
Lower wishbones with new ball joints. These take all the weight of the car and tend to go before the upper ball joints. Wire brushed and coated with Zinc primer. 2-Part epoxy mastic topcoat. Polybushed
0 2020/05/24 03:42:11
Finished front suspension
Finished front suspension
1 2020/05/24 03:42:10
Finished front suspension
Finished front suspension
0 2020/05/24 03:42:19
Disk wirebrushed. Coated non-contact surfaces with caliper paint. Shieldds repainted with engine enamel
Disk wirebrushed. Coated non-contact surfaces with caliper paint. Shieldds repainted with engine enamel
0 2020/05/26 01:44:50
Headlight levelling recoated
Headlight levelling recoated
0 2020/05/26 01:44:45
Oil cooler bracket recoated.Zinc primer plus 2-part epoxy mastic top coat
Oil cooler bracket recoated.Zinc primer plus 2-part epoxy mastic top coat
0 2020/05/26 01:49:46
Fully assembled
Fully assembled
0 2020/05/24 03:42:18
Finished front suspension
Finished front suspension
0 2020/05/24 03:42:08
Subframe and sway bar brackets Zinc primer plus 2-part epoxy mastic top coat
Subframe and sway bar brackets Zinc primer plus 2-part epoxy mastic top coat
0 2020/05/26 01:49:47
Subframe front bushes are Aluminium. Recoated with etch primer, then enamel. re-bonded to Rubber bushes
Subframe front bushes are Aluminium. Recoated with etch primer, then enamel. re-bonded to Rubber bushes
0 2020/05/26 01:49:48
DIY Steel Alternator cooling NACA duct.
DIY Steel Alternator cooling NACA duct.
0 2020/06/11 10:48:34
0 2022/06/30 12:00:19
0 2022/06/30 12:00:21
0 2025/08/09 05:45:20
0 2025/08/09 05:45:22
0 2025/08/09 05:45:23
0 2025/08/09 05:45:24
0 2025/08/09 05:48:04
0 2025/08/09 05:49:24