Jaguar Forums - Jaguar Enthusiasts Forum
0 2020/11/17 10:49:29
0 2020/11/17 13:10:40
0 2020/11/22 15:50:57
0 2020/11/22 15:51:18
0 2020/12/08 16:45:04
0 2020/12/08 16:45:10
0 2020/12/13 10:20:46
0 2020/12/13 10:20:52
0 2020/12/13 10:20:56
0 2020/12/22 13:18:49
0 2020/12/22 13:18:54
0 2020/12/25 17:47:03
Had to get creative with this bolt. Didn’t have a tool I could use to undo it.
Had to get creative with this bolt. Didn’t have a tool I could use to undo it.
0 2020/12/25 17:47:08
0 2020/12/25 17:47:14
0 2020/12/25 17:47:22
0 2020/12/25 17:47:27
0 2020/12/25 17:47:31
I made sure to mark the bypass valve so I can line it exactly when putting it back on.
I made sure to mark the bypass valve so I can line it exactly when putting it back on.
0 2020/12/25 17:51:48
Got all the bolts off and pulled off the snout. A little filthy inside.
Got all the bolts off and pulled off the snout. A little filthy inside.
0 2020/12/25 17:51:53
Took out the old worn coupler and started cleaning
Took out the old worn coupler and started cleaning
0 2020/12/25 17:51:57
Started cleaning off all filth and old gasket with break cleaner and a rag
Started cleaning off all filth and old gasket with break cleaner and a rag
0 2020/12/25 17:52:02
Finally clean enough. I put a dab of grease on the ends to help slide the new coupler in. I put the snout back on using Loctite 555352 515 Gasket Maker. Finally start putting everything back reverse order. Line up the dowels it should seat without any issues. Then use the proper torque specs to bolt everything back up.
Finally clean enough. I put a dab of grease on the ends to help slide the new coupler in. I put the snout back on using Loctite 555352 515 Gasket Maker. Finally start putting everything back reverse order. Line up the dowels it should seat without any issues. Then use the proper torque specs to bolt everything back up.
0 2020/12/25 17:52:06
Couldn’t pull the supercharger up with my human strength. One of the treads mentioned using this support to pull it off the dowels. Made it so much easier.
Couldn’t pull the supercharger up with my human strength. One of the treads mentioned using this support to pull it off the dowels. Made it so much easier.
0 2020/12/25 17:52:10
With my luck, nothing ever goes according to plan. Broke this stupid tube that goes into the water pump. Had to order the updated part. Common issue from what I’ve seen.
With my luck, nothing ever goes according to plan. Broke this stupid tube that goes into the water pump. Had to order the updated part. Common issue from what I’ve seen.
0 2020/12/25 17:52:14
Again why end there? One of the long bolts for had some messed up threads. Purchased a new one from Jag dealership and it went in smooth.
Again why end there? One of the long bolts for had some messed up threads. Purchased a new one from Jag dealership and it went in smooth.
0 2020/12/25 17:52:17
New part along with new hose.
New part along with new hose.
0 2020/12/25 17:52:21
Replaced the old and cracked rubber hose for bypass valve with some silicone hose
Replaced the old and cracked rubber hose for bypass valve with some silicone hose
0 2020/12/25 18:13:35
Took out as much coolant as possible and started replacing it with water to use with purple ice.
Took out as much coolant as possible and started replacing it with water to use with purple ice.
0 2020/12/25 18:20:26
0 2020/12/27 18:44:30
0 2020/12/31 00:56:26
0 2020/12/31 00:57:49
0 2021/01/10 03:24:12
0 2021/01/16 14:30:05
I’ve read jacking up with the pinch rails in one spot can damage the pinch rails. But with this bar it seems to help.
I’ve read jacking up with the pinch rails in one spot can damage the pinch rails. But with this bar it seems to help.
0 2021/01/16 14:30:42
The space to undo the fill plug is limited.
The space to undo the fill plug is limited.
0 2021/01/16 14:32:54
I know people have created their own tools but I just bought stubby hex from Amazon. Fit perfectly.
I know people have created their own tools but I just bought stubby hex from Amazon. Fit perfectly.
0 2021/01/16 14:33:01
This was the drain plug. I was scared a little since it’s plastic but it didn’t break. It’s 10mm while the drain plug was 8mm.
This was the drain plug. I was scared a little since it’s plastic but it didn’t break. It’s 10mm while the drain plug was 8mm.
0 2021/01/16 14:35:48
I’m glad I did this because what came out looked extremely dark.. like motor oil.
I’m glad I did this because what came out looked extremely dark.. like motor oil.
0 2021/01/16 14:35:53
Bought a 2 gallon sprayer to help me pump fluid into the transmission.
Bought a 2 gallon sprayer to help me pump fluid into the transmission.
0 2021/01/16 14:35:58
Attached this to the end of the hose to act almost as a hook. It worked well. Allowed me to pump the sprayer without having to hold a tube in the fill hole.
Attached this to the end of the hose to act almost as a hook. It worked well. Allowed me to pump the sprayer without having to hold a tube in the fill hole.
0 2021/01/16 14:36:04