Jaguar Forums - Jaguar Enthusiasts Forum
0 2021/04/16 21:36:27
0 2021/04/19 12:44:11
0 2021/04/19 14:01:33
Two packers plus white 'locator' gizmo under each spring.
Two packers plus white 'locator' gizmo under each spring.
0 2021/04/19 14:01:36
The castellated 'gizmo'. One tab missing from this one....driver side. All 6 tabs present on pass side.
The castellated 'gizmo'. One tab missing from this one....driver side. All 6 tabs present on pass side.
0 2021/04/19 14:01:39
2 x MJA 2182 AA spring packer
2 x MJA 2182 AA spring packer
0 2021/04/19 14:01:42
With no white gizmo the packers slip easily over dust gaiter which seats fully down on spring pan.
With no white gizmo the packers slip easily over dust gaiter which seats fully down on spring pan.
0 2021/04/19 14:01:46
Gizmo fits very snugly over spring base pan.
Gizmo fits very snugly over spring base pan.
0 2021/04/19 14:01:49
With gizmo in place gaiter cannot fit on spring pan.
With gizmo in place gaiter cannot fit on spring pan.
0 2021/04/19 14:01:51
0 2021/04/19 14:01:54
Deteriorating top donut, torn gaiter and destroyed bump stop.
Deteriorating top donut, torn gaiter and destroyed bump stop.
0 2021/04/20 14:25:55
Trashed bushing in lower mount.
Trashed bushing in lower mount.
0 2021/04/20 14:29:11
Loose bolt in lower mount had wallowed out the lower wishbone (A arm) mounting plates. Got replacement plates from Jaguar Heaven in CA.
Loose bolt in lower mount had wallowed out the lower wishbone (A arm) mounting plates. Got replacement plates from Jaguar Heaven in CA.
0 2021/04/20 14:31:34
Lower strut mount bolt. Hammering on the lower wishbone mounting plates due to under torquing - primary cause of suspension clunk.
Lower strut mount bolt. Hammering on the lower wishbone mounting plates due to under torquing - primary cause of suspension clunk.
0 2021/04/20 14:41:05
Top wishbone mounts looking fine.
Top wishbone mounts looking fine.
0 2021/04/20 14:46:01
Upper spring seat showing wear but the coating still intact
Upper spring seat showing wear but the coating still intact
0 2021/04/20 14:48:21
Looks can be deceiving.
Looks can be deceiving.
0 2021/04/20 14:50:10
Damper rods still centered.
Damper rods still centered.
0 2021/04/20 14:52:13
For some reason pass side much worse than driver side.
For some reason pass side much worse than driver side.
0 2021/04/20 14:54:56
After seeing price of OEM mounts and hearing horror stories about aftermarket knock-offs, took a chance on these URO units. Time will tell!
After seeing price of OEM mounts and hearing horror stories about aftermarket knock-offs, took a chance on these URO units. Time will tell!
0 2021/04/20 14:57:07
Didn't like the button head rivets preventing the mount from laying flat under the shock tower.
Didn't like the button head rivets preventing the mount from laying flat under the shock tower.
0 2021/04/20 14:59:57
Didn't like the button head rivets preventing the mount from laying flat under the shock tower.
Didn't like the button head rivets preventing the mount from laying flat under the shock tower.
0 2021/04/20 15:02:11
Looks can be deceiving.
Looks can be deceiving.
0 2021/04/20 15:03:32
Top wishbone bushings looking fine.
Top wishbone bushings looking fine.
0 2021/04/20 15:04:38
Looks can be deceiving.
Looks can be deceiving.
0 2021/04/20 15:05:39
Drilled URO rivets out to replace with flat head like OEM and discovered the plates were already countersunk for flat head, but button head had been used.....!
Drilled URO rivets out to replace with flat head like OEM and discovered the plates were already countersunk for flat head, but button head had been used.....!
0 2021/04/20 15:08:08
0 2021/04/21 21:51:37
0 2021/04/21 21:52:49
0 2021/04/21 21:54:38
0 2021/04/21 21:54:41
0 2021/04/22 13:08:20
0 2021/04/23 11:06:31
Mystery Foam Wedge
Mystery Foam Wedge
0 2021/05/01 12:44:14
Mystery Hook/Clip
Mystery Hook/Clip
0 2021/05/01 12:44:15
0 2021/05/04 16:11:53
0 2021/05/08 08:34:03
0 2021/05/13 18:35:17
0 2021/05/13 18:35:21
0 2021/05/13 18:45:43
0 2021/05/13 18:46:03