Jaguar Forums - Jaguar Enthusiasts Forum
Shows some signs of damage!
Shows some signs of damage!
0 2023/05/24 20:02:20
Carrier centered and urethane on bottom only to reverse gravity's damage!
Carrier centered and urethane on bottom only to reverse gravity's damage!
0 2023/05/24 19:51:33
0 2023/05/24 19:51:01
Trans mount wired in center.
Trans mount wired in center.
0 2023/05/24 19:50:18
These must be pretty darn tough!
These must be pretty darn tough!
0 2023/05/24 19:49:33
Have seen much worse.
Have seen much worse.
0 2023/05/24 19:48:48
0 2023/05/24 19:47:56
Signs of some damage.
Signs of some damage.
0 2023/05/24 19:46:47
0 2023/05/24 19:23:02
0 2023/05/24 19:21:51
0 2023/05/24 19:20:44
0 2023/05/23 19:15:35
Nicest rears around !
Nicest rears around !
0 2023/05/23 19:12:24
0 2023/05/23 19:10:39
0 2023/05/23 19:09:02
0 2023/03/26 19:11:15
I took the old bushing that i pressed the center out of, placed it back in halfway and used the urethane that I bought to secure it back and let it dry 24hrs. It is pretty darn stiff and harder to cut than the factory rubber of the bushings. So I believe it will help the bushings that i filled in for the cradle and diff.
I took the old bushing that i pressed the center out of, placed it back in halfway and used the urethane that I bought to secure it back and let it dry 24hrs. It is pretty darn stiff and harder to cut than the factory rubber of the bushings. So I believe it will help the bushings that i filled in for the cradle and diff.
0 2023/03/26 18:42:06
Two of the old bushings i pressed out.
Two of the old bushings i pressed out.
0 2023/03/26 18:40:44
The old bushings!
The old bushings!
0 2023/03/26 18:35:50
Hardens to 55-65 range. Several videos of using this just google "windo weld for buahings" I used it to fill my cradle and diff bushings for extra stiffness trying to reduce wheel hop.
Hardens to 55-65 range. Several videos of using this just google "windo weld for buahings" I used it to fill my cradle and diff bushings for extra stiffness trying to reduce wheel hop.
0 2023/03/26 18:27:26
The huge #10's required me.to press out the center then hammer and chisel to "fold" the bushing out. I also used an air chisel but be caregul about marring the mating area. If you do use a file or dremel.to dress it smooth.
The huge #10's required me.to press out the center then hammer and chisel to "fold" the bushing out. I also used an air chisel but be caregul about marring the mating area. If you do use a file or dremel.to dress it smooth.
0 2023/03/26 18:18:16
Some require 2 sets of #11's, but not the case with mine. I needed one box of each
Some require 2 sets of #11's, but not the case with mine. I needed one box of each
0 2023/03/26 18:18:00
Each box contains 2, one from each side.
Each box contains 2, one from each side.
0 2023/03/26 18:17:43
0 2023/03/14 17:10:58
More twist!
More twist!
0 2023/03/14 17:10:36
You can see the twisting line
You can see the twisting line
0 2023/03/14 17:10:00
0 2023/03/14 17:09:42
The axles are beefy until the spline part, then it steps down some!
The axles are beefy until the spline part, then it steps down some!
0 2023/03/14 17:08:31
0 2023/03/14 17:07:40
0 2023/03/14 17:07:17
0 2023/03/12 18:11:27
0 2023/03/12 18:10:36
No spacers here!
No spacers here!
0 2023/02/22 14:26:43
Surprised they filled out the wheel wells.
Surprised they filled out the wheel wells.
0 2023/02/22 14:25:37
0 2023/02/22 14:24:28
0 2023/02/13 10:11:53
0 2023/02/13 10:11:50
0 2023/02/13 10:11:45
What the lights looked like on the car! Took a really sunny day and being in the right position to see the handy work.
What the lights looked like on the car! Took a really sunny day and being in the right position to see the handy work.
0 2023/01/30 18:33:42
If you zoom in very close around the lens you will see a slight masking overspray flash.
If you zoom in very close around the lens you will see a slight masking overspray flash.
0 2023/01/30 18:30:11