Jaguar Forums - Jaguar Enthusiasts Forum
0 2016/01/16 13:38:55
0 2016/01/17 14:18:35
0 2016/01/17 14:18:37
0 2016/01/17 14:18:40
0 2016/01/17 14:18:43
0 2016/01/17 14:18:45
0 2016/01/17 14:18:47
0 2016/01/17 16:03:24
0 2016/01/17 16:03:27
0 2016/01/17 16:03:31
0 2016/01/17 16:03:35
0 2016/01/17 16:03:38
The two different styles of bolts that keep the cover on the cylinder head. They all have grommets. The manual says to replace all the grommets.
The two different styles of bolts that keep the cover on the cylinder head. They all have grommets. The manual says to replace all the grommets.
0 2016/01/18 18:41:27
Valve cover removed
Valve cover removed
0 2016/01/19 16:46:09
0 2016/01/19 16:46:24
0 2016/01/19 16:46:39
Coils removed
Coils removed
0 2016/01/19 16:46:50
0 2016/01/19 16:53:41
0 2016/01/22 16:30:30
0 2016/01/22 16:42:33
0 2016/01/22 16:42:35
The subframe is out of the way making access to the engine mounts a snap
The subframe is out of the way making access to the engine mounts a snap
0 2016/01/23 12:53:35
Used the Jaguar engine brackets recommended in the book and hooked them up to Harbor Freight engine strattle
Used the Jaguar engine brackets recommended in the book and hooked them up to Harbor Freight engine strattle
0 2016/01/23 12:53:38
Marked all four corners of the subframe. This is where the camber and caster settings are done.
Marked all four corners of the subframe. This is where the camber and caster settings are done.
0 2016/01/23 12:53:41
Removed the power steering rack from the subframe. The bushings are *perfect*
Removed the power steering rack from the subframe. The bushings are *perfect*
0 2016/01/23 12:53:46
Lower front and lower rear arms removed from the subframe. All 4 fushings are perfect
Lower front and lower rear arms removed from the subframe. All 4 fushings are perfect
0 2016/01/23 12:53:49
All 4 subframe bushings are perfect. The subframe is lowered enough for me to replace the sway bar bushings
All 4 subframe bushings are perfect. The subframe is lowered enough for me to replace the sway bar bushings
0 2016/01/23 12:53:53
0 2016/01/23 12:53:56
0 2016/01/23 12:53:59
The one on the left is one of the old bushings I removed
The one on the left is one of the old bushings I removed
0 2016/01/24 08:34:19
0 2016/01/24 08:39:14
0 2016/01/24 08:39:16
Harbor Freightness to the rescue
Harbor Freightness to the rescue
0 2016/01/24 08:47:00
I just needed it to get the nut loose
I just needed it to get the nut loose
0 2016/01/24 08:47:05
After that I used the stubby to finish removing the bolt
After that I used the stubby to finish removing the bolt
0 2016/01/24 08:47:08
Old on top and new on the bottom. I have a nice set of used engine mounts now for my next project
Old on top and new on the bottom. I have a nice set of used engine mounts now for my next project
0 2016/01/24 08:47:15
Before: Sub-frame hanging loose
Before: Sub-frame hanging loose
0 2016/01/24 14:48:40
After: All buttoned up
After: All buttoned up
0 2016/01/24 14:48:59
Torque to yield for the front 2 sub frame bolts
Torque to yield for the front 2 sub frame bolts
0 2016/01/24 14:49:13
Removing the spark plug wells o-rings
Removing the spark plug wells o-rings
0 2016/01/28 17:53:21