Jaguar Forums - Jaguar Enthusiasts Forum
I designed and had this made for me. Fitting was fun with lots of tucking and sewing. I 3D printed the lower cover and used a Sport badge to cover the old V dust trap. The centre badge is made from a 3D printed disc holding a gear selector badge, I might need to duck if the airbag deploys, lol.
I designed and had this made for me. Fitting was fun with lots of tucking and sewing. I 3D printed the lower cover and used a Sport badge to cover the old V dust trap. The centre badge is made from a 3D printed disc holding a gear selector badge, I might need to duck if the airbag deploys, lol.
0 2023/01/19 09:00:49
0 2023/01/19 09:00:57
I fitted this gloss carbon fibre boot lip thats based on the XFR Sport lip, finishes the boot off nicely.
I fitted this gloss carbon fibre boot lip thats based on the XFR Sport lip, finishes the boot off nicely.
0 2023/01/19 09:01:02
0 2023/01/19 09:01:07
The thresholds were very scuffed so I used some wrap and red lettering to make these, looks much cleaner now.
The thresholds were very scuffed so I used some wrap and red lettering to make these, looks much cleaner now.
0 2023/01/19 09:01:15
Wheels sprayed in a shadow chrome custom paint and lacquered, callipers sprayed in red with white lettering then lacquered.
Wheels sprayed in a shadow chrome custom paint and lacquered, callipers sprayed in red with white lettering then lacquered.
0 2023/01/19 09:01:21
I fitted these little button covers, I think they look much better than the original black and no more sticky surfaces.
I fitted these little button covers, I think they look much better than the original black and no more sticky surfaces.
0 2023/01/19 09:04:54
Covered the interior wood trim with carbon fibre wrap and coloured the leather in gloss black.
Covered the interior wood trim with carbon fibre wrap and coloured the leather in gloss black.
0 2023/01/19 09:05:00
0 2023/09/07 03:40:58
0 2023/09/07 03:41:04
0 2023/09/08 01:44:26
0 2023/09/08 01:44:33
0 2023/09/08 11:12:25
Here you can see the trims that I made to finish the end on the right and the joint on the left. Also I had to make new trims for the lower part that usually goes right across under the facia, the one supplied was a mirror of what I needed so I used 2 full trims and managed to cut the parts needed with a little finishing of the ends as one was open.
Here you can see the trims that I made to finish the end on the right and the joint on the left. Also I had to make new trims for the lower part that usually goes right across under the facia, the one supplied was a mirror of what I needed so I used 2 full trims and managed to cut the parts needed with a little finishing of the ends as one was open.
0 2023/09/08 11:12:33
I made this as the original centre consul USB didn't work after fitting the new head unit so this uses a USB hub and card reader which I simply connected to one of the head units USB cables. Works brilliantly :)
I made this as the original centre consul USB didn't work after fitting the new head unit so this uses a USB hub and card reader which I simply connected to one of the head units USB cables. Works brilliantly :)
0 2023/09/08 11:12:38
0 2023/09/08 11:12:45
0 2023/09/08 11:12:49
0 2023/09/08 11:12:55
0 2023/09/08 11:13:00
0 2023/09/08 11:13:05