Jaguar Forums - Jaguar Enthusiasts Forum
0 2015/09/04 18:49:50
0 2015/09/10 11:02:51
0 2015/11/20 10:07:48
0 2016/06/14 09:39:10
1930 Model A Tudor hotrod.
1930 Model A Tudor hotrod.
0 2017/10/10 16:09:53
1930 Tudor hotrod engine
1930 Tudor hotrod engine
0 2017/10/10 16:18:57
1930 Model A before
1930 Model A before
0 2017/10/10 16:20:36
Xj8 exhaust 1
Xj8 exhaust 1
0 2017/10/11 06:26:02
Xj8 exhaust 2
Xj8 exhaust 2
0 2017/10/11 06:26:35
Pgt engine.
Pgt engine.
0 2017/10/11 18:11:45
2000 XJ8 & 1999 XJR
2000 XJ8 & 1999 XJR
0 2022/04/05 13:27:20
Shift knob
Shift knob
0 2022/04/05 13:27:25
0 2022/04/05 13:27:28
Floormats
Floormats
0 2022/04/05 13:27:32
0 2022/04/05 13:27:36
0 2022/04/05 13:27:40
0 2022/04/05 13:27:43
0 2022/04/05 18:29:54
0 2022/04/05 18:30:01
0 2022/04/05 18:30:05
0 2022/04/08 09:29:47
0 2022/04/08 09:29:49
0 2022/04/08 09:29:51
0 2022/04/22 09:00:03
0 2022/04/22 09:00:07
0 2022/04/22 09:00:12
0 2022/04/22 09:00:15
0 2022/04/22 09:00:19
1999 Jaguar XJR
1999 Jaguar XJR
0 2023/05/30 16:43:38
Brembos
Brembos
0 2023/05/30 16:43:44
0 2023/05/30 16:58:56
The first thing I did was strip and paint them, hardware went into the ultrasonic cleaner and the calipers got scuffed and sprayed
The first thing I did was strip and paint them, hardware went into the ultrasonic cleaner and the calipers got scuffed and sprayed
0 2023/05/30 17:05:19
With this, off the shelf color and aside from being a tad darker and a more metallic it's a good match to the emblems and original color
With this, off the shelf color and aside from being a tad darker and a more metallic it's a good match to the emblems and original color
0 2023/05/30 17:05:24
Painted, reassembled, and loaded with Hawk HPS pads.
Painted, reassembled, and loaded with Hawk HPS pads.
0 2023/05/30 17:05:28
The first and only real modification to the car itself is the caliper mount needs to be threaded. Previously the caliper horseshoe was threaded but the Brembo mounts on the opposite side of the ears so they need to be threaded. Slightly drill and then tap for the new hardware.
The first and only real modification to the car itself is the caliper mount needs to be threaded. Previously the caliper horseshoe was threaded but the Brembo mounts on the opposite side of the ears so they need to be threaded. Slightly drill and then tap for the new hardware.
0 2023/05/30 17:05:32
The hose connection is the same as stock, install rotor and caliper *not pictured but to swap the front dust sheilds you remove 3 bolts and have to pop the lower ball joint as the lower tab is sandwiched there. I also popped off the tie rod to make that easier. You can modify stock front plates but it's better to swap them if you can.
The hose connection is the same as stock, install rotor and caliper *not pictured but to swap the front dust sheilds you remove 3 bolts and have to pop the lower ball joint as the lower tab is sandwiched there. I also popped off the tie rod to make that easier. You can modify stock front plates but it's better to swap them if you can.
0 2023/05/30 17:05:35
Behind the wheel, 19“ Coventry Whitley
Behind the wheel, 19“ Coventry Whitley
0 2023/05/30 17:05:39
The rear backing plates don't go over the rotor, they look the same size as stock but have a cutout for the caliper and the lip is cut down.
The rear backing plates don't go over the rotor, they look the same size as stock but have a cutout for the caliper and the lip is cut down.
0 2023/05/30 17:05:43
This is the modified stock backing plate, I used a nibbler to get the bent edge part cut down as much as I could and then cut out for the caliper. I had the rear ones as well for the Brembo set but things were not moving easily and after the first bolt broke I decided it wasn't worth it.
This is the modified stock backing plate, I used a nibbler to get the bent edge part cut down as much as I could and then cut out for the caliper. I had the rear ones as well for the Brembo set but things were not moving easily and after the first bolt broke I decided it wasn't worth it.
0 2023/05/30 17:05:47
The rear brake hoses were the right size as well, but the thread pitch on the stock banjo bolt is different so you will need those bolts, I think m10 banjo, and new crush washers.
The rear brake hoses were the right size as well, but the thread pitch on the stock banjo bolt is different so you will need those bolts, I think m10 banjo, and new crush washers.
0 2023/05/30 17:05:51