Jaguar Forums - Jaguar Enthusiasts Forum
0 2024/10/22 14:47:40
0 2024/10/22 14:44:32
0 2024/10/22 14:43:32
0 2024/10/22 14:42:38
0 2024/10/22 14:41:14
0 2024/10/18 14:22:34
0 2024/10/17 17:57:21
0 2024/10/16 15:04:18
0 2024/09/29 15:12:22
0 2024/09/29 00:55:35
0 2024/08/31 21:41:13
0 2024/07/18 17:04:36
0 2024/07/12 15:53:46
0 2024/07/12 15:53:34
0 2024/07/07 22:16:01
0 2024/07/02 18:07:32
0 2024/06/12 19:25:53
0 2024/06/11 01:59:11
0 2024/06/07 04:46:05
0 2024/06/07 04:45:57
My VCATLabel
My VCATLabel
0 2024/05/27 02:19:28
Spare ECM. My vin is some 1050 units older
Spare ECM. My vin is some 1050 units older
0 2024/05/27 02:19:13
After a number of ins and outs l found a thin aluminium plate over the retaining clips, held by some 100 mph tape held the head unit securely but still allowed for removal without the need for any tòols.
After a number of ins and outs l found a thin aluminium plate over the retaining clips, held by some 100 mph tape held the head unit securely but still allowed for removal without the need for any tòols.
0 2024/04/15 17:30:12
After a few ins and outs that overlaying the retaining clips with a thin aluminium plate and 100 mph tape held the head unit secuely but still allowed it to be removed without the need for any tools.
After a few ins and outs that overlaying the retaining clips with a thin aluminium plate and 100 mph tape held the head unit secuely but still allowed it to be removed without the need for any tools.
0 2024/04/15 17:24:38
Now draw tools toward you until mark on stem is just visible. Head unit can be removed by grasping with fingers in cassette slot. A slight twisting motion may be required.
Now draw tools toward you until mark on stem is just visible. Head unit can be removed by grasping with fingers in cassette slot. A slight twisting motion may be required.
0 2024/04/15 17:15:40
Manipulate tools toward outside edges of head unit. They will stop at retaining clips.
Manipulate tools toward outside edges of head unit. They will stop at retaining clips.
0 2024/04/15 17:10:56
Push tools straight in to full length.
Push tools straight in to full length.
0 2024/04/15 17:08:52
Insert tools between top edge of head unit and switch pack immediately above in positions shown.
Insert tools between top edge of head unit and switch pack immediately above in positions shown.
0 2024/04/15 17:05:09
0 2024/04/15 17:03:13
Basic tool dimensions. Gauge is around .5mm and two are required, mirror image.
Basic tool dimensions. Gauge is around .5mm and two are required, mirror image.
0 2024/04/15 16:59:10
0 2024/04/14 19:52:19
0 2024/04/10 19:59:00
0 2024/01/21 00:17:15
0 2024/01/15 13:50:43
The circlip for retaining collets can be seen on lower damper body.
The circlip for retaining collets can be seen on lower damper body.
0 2024/01/01 21:34:50
0 2023/12/13 03:02:42
0 2023/12/10 00:53:01
Assembly back in place. On hoist full droop in this pic.
Assembly back in place. On hoist full droop in this pic.
0 2023/12/10 00:26:21
Needle roller thrust bearing with spring spacer/debris shield.
Needle roller thrust bearing with spring spacer/debris shield.
0 2023/12/10 00:26:04
Threaded sleeve locks onto original damper circlip in place of OEM spring seat.
Threaded sleeve locks onto original damper circlip in place of OEM spring seat.
0 2023/12/10 00:25:46