Jaguar Forums - Jaguar Enthusiasts Forum
Motor mount before
Motor mount before
0 2017/09/13 05:41:11
Motor mount after
Motor mount after
0 2017/09/13 05:43:07
Old style vs new style
Old style vs new style
0 2017/10/02 12:47:00
Engine compartment in Old English white.
Engine compartment in Old English white.
0 2017/10/06 16:02:31
All rebuilt with new bearings and bushings. Plus cleaned up a tad.
All rebuilt with new bearings and bushings. Plus cleaned up a tad.
0 2017/10/06 16:06:24
Repaired end assembly
Repaired end assembly
0 2017/10/06 16:11:16
0 2017/10/28 15:42:42
0 2017/10/28 15:42:53
Clutch cylinder
Clutch cylinder
0 2017/11/08 15:25:54
0 2017/11/08 15:27:13
0 2017/11/08 15:31:37
Original lid pretty eaten up with rust
Original lid pretty eaten up with rust
0 2017/11/08 15:37:04
Nice spare.
Nice spare.
0 2017/11/08 15:37:18
0 2017/11/08 15:40:10
0 2017/11/08 15:40:25
Old vs new
Old vs new
0 2017/11/09 06:31:56
Not very rebuildable...THis is pretty much what all my hydraulic parts looked like.
Not very rebuildable...THis is pretty much what all my hydraulic parts looked like.
0 2017/11/09 06:32:06
Inside Old door
Inside Old door
0 2017/11/25 13:44:52
My less than awesome body work that I cut off
My less than awesome body work that I cut off
0 2017/11/25 13:45:39
Test fit.
Test fit.
0 2017/11/25 13:51:07
All cleaned and protected inside
All cleaned and protected inside
0 2017/11/25 13:51:24
0 2017/11/25 13:53:45
0 2017/11/25 13:53:55
0 2017/12/01 14:13:03
0 2017/12/01 14:13:31
The circled areas are small depressions. The grey epoxy shows I have sanded the primer as far as I can go. I can use glazing putty to fill the indentations and spray another coat of primer.
The circled areas are small depressions. The grey epoxy shows I have sanded the primer as far as I can go. I can use glazing putty to fill the indentations and spray another coat of primer.
0 2017/12/02 17:01:51
Guide coat on on the right side, sanded off on the left
Guide coat on on the right side, sanded off on the left
0 2017/12/16 12:45:01
There are just a ton of parts and surfaces to sand when painting the inside and outside of the caq! Any time I sand down to the epoxy or metal in the process of getting everything smooth, I re-spray with primer and sand until smooth.
There are just a ton of parts and surfaces to sand when painting the inside and outside of the caq! Any time I sand down to the epoxy or metal in the process of getting everything smooth, I re-spray with primer and sand until smooth.
0 2017/12/16 12:45:17
Getting ready for paint!
Getting ready for paint!
0 2017/12/16 12:45:27
Paint!
Paint!
0 2017/12/21 12:57:04
0 2017/12/21 12:57:27
0 2017/12/21 12:57:48
0 2017/12/21 12:59:53
Shiny roof after color sanding. Red dot is a reflection of an exit light.
Shiny roof after color sanding. Red dot is a reflection of an exit light.
0 2017/12/28 10:50:56
Refurbished rear end back in car
Refurbished rear end back in car
0 2017/12/28 10:54:39
This is the gun I used. Worked well for paint
This is the gun I used. Worked well for paint
0 2017/12/31 08:58:11
New fuel pump
New fuel pump
0 2018/01/04 18:12:30
AC control behind the dash
AC control behind the dash
0 2018/01/04 18:15:14
Part pulled out
Part pulled out
0 2018/01/04 18:15:33
Professional installation
Professional installation
0 2018/01/05 14:47:57