Jaguar Forums - Jaguar Enthusiasts Forum
0 2017/02/13 22:21:07
0 2017/02/22 17:22:02
0 2017/03/14 15:55:17
0 2017/03/14 15:57:40
0 2017/04/27 07:50:22
0 2017/05/07 09:08:57
0 2017/05/10 22:18:48
0 2017/07/07 10:40:37
0 2019/03/03 20:44:59
So this is what we're going away from. Deteriorating, stinky, possibly rat-eaten, with springs sticking through. Ick
So this is what we're going away from. Deteriorating, stinky, possibly rat-eaten, with springs sticking through. Ick
0 2019/03/27 21:25:38
So, beginning...
So, beginning...
0 2019/03/27 21:27:24
Sewing in stays
Sewing in stays
0 2019/03/27 21:28:09
Extremely fortunate "Ebay score". Thank you Pat!
Extremely fortunate "Ebay score". Thank you Pat!
0 2019/03/27 21:28:31
Pinned, ready for sewing
Pinned, ready for sewing
0 2019/03/27 21:29:32
All pieces (springs, foam, cover) put together
All pieces (springs, foam, cover) put together
0 2019/03/27 21:30:26
And finally installed in the car. Not perfect, put tons better than what was in the car :)
And finally installed in the car. Not perfect, put tons better than what was in the car :)
0 2019/03/27 21:31:18
The tach generator is at the bottom of the pic, with 2 wires leading from it.
The tach generator is at the bottom of the pic, with 2 wires leading from it.
0 2019/03/27 22:09:05
The bolts that hold this in are Allen heads? What? I was expecting more slot heads (And I would have replaced them)
The bolts that hold this in are Allen heads? What? I was expecting more slot heads (And I would have replaced them)
0 2019/03/27 22:10:29
This is the old one out
This is the old one out
0 2019/03/27 22:12:30
And putting the new one in. This was complicated because I could not see the bolts, and lining up the drive shaft was a bit of a pain.
And putting the new one in. This was complicated because I could not see the bolts, and lining up the drive shaft was a bit of a pain.
0 2019/03/27 22:12:55
And this is the new one in. I was surprised at how quickly I was able to do this(only about 1.5 hours)
And this is the new one in. I was surprised at how quickly I was able to do this(only about 1.5 hours)
0 2019/03/27 22:15:17
Kind-of a "before" shot. Note the old "tar-paper" sound dampener
Kind-of a "before" shot. Note the old "tar-paper" sound dampener
0 2019/05/21 23:31:52
Bolt that held the post at the rear of the window frame. It and the bolt that held it have been replaced, as most of the threads were solid rust
Bolt that held the post at the rear of the window frame. It and the bolt that held it have been replaced, as most of the threads were solid rust
0 2019/05/21 23:32:26
This held the front post of the window frame. Not sure what the wood was for - sound dampener?
This held the front post of the window frame. Not sure what the wood was for - sound dampener?
0 2019/05/21 23:32:27
The 3 main components of the front door
The 3 main components of the front door
0 2019/05/21 23:32:29
Part-way through cleaning the junk off with industrial cleaner.
Part-way through cleaning the junk off with industrial cleaner.
0 2019/05/21 23:32:30
Almost all of the rust and old adhesive removed
Almost all of the rust and old adhesive removed
0 2019/05/21 23:32:32
0 2021/06/13 20:10:31
0 2021/06/13 20:16:01
0 2021/06/13 20:16:29
First a little "cardboard-aided-design"...
First a little "cardboard-aided-design"...
0 2021/08/03 17:00:07
My setup is pretty primitive. I beat the bracket into shape on my cheapy Harbor Freight vice and drilled the holes with my cordless drill
My setup is pretty primitive. I beat the bracket into shape on my cheapy Harbor Freight vice and drilled the holes with my cordless drill
0 2021/08/03 17:00:16
0 2021/08/03 17:00:29
0 2021/08/03 17:03:11
0 2021/08/03 17:04:45
0 2021/08/03 17:04:47
Driver gauge cluster in place
Driver gauge cluster in place
0 2021/08/03 17:04:48
This was from a couple weeks ago. You can see the plywood substitute that I have used for the last couple years for the driver side gauges. God willing I'll never go back to that.
This was from a couple weeks ago. You can see the plywood substitute that I have used for the last couple years for the driver side gauges. God willing I'll never go back to that.
0 2021/08/03 17:04:56
0 2021/09/04 20:36:56
After prep I put down a layer of Dynamat
After prep I put down a layer of Dynamat
0 2021/10/17 14:25:24