Jaguar Forums - Jaguar Enthusiasts Forum
  • LOG IN
  • REGISTER
  • Forums
    • General Jaguar Forums
      • New Member Area - Intro a MUST
      • Jaguar Forums Feedback & Suggestion Center
      • General Tech Help
    • Jaguar Models ( Current )
      • XF (X260)
      • F-Type ( X152 )
      • XE ( X760 )
      • E-Pace
      • F-Pace (X761) / C-X17
      • I-Pace EV
    • Jaguar Models ( Modern )
      • XF and XFR ( X250 )
      • XJ ( X351 )
      • X-Type ( X400 )
      • S-Type / S type R Supercharged V8 ( X200 )
      • XJ XJ6 / XJ8 / XJR ( X350 & X358 )
      • XJ XJ8 / XJR ( X308 )
      • XJ XJ12 ( X305 )
      • XJ XJ6 / XJR6 ( X300 )
      • XK8 / XKR ( X100 )
      • XK / XKR ( X150 )
    • Jaguar Models ( Classics )
      • Mark V - X 420G
      • MKI / MKII S type 240 340 & Daimler
      • XK120 XK140 XK150
      • E type ( XK-E )
      • XJ6 & XJ12 Series I, II & III
      • XJS ( X27 )
      • XJ40 ( XJ81 )
      • XKSS
      • XJ220
    • Other Jaguars
      • Other Jaguar Models / Concepts / Replicas
    • Diesel variants
      • Diesel variants - All models
    • Non Jaguar vehicles
      • Non-Jaguar Vehicles
    • Brand Review
      • Jaguar Press release
      • Jaguar Customer Relationship Centre
      • Jaguar Engines & transmissions
      • Wheels / Tires, Suspension & handling
      • Interior
      • Exterior
      • Audio/Visual Electronics
      • Detailing / Car care
      • Motorsports
    • Jaguar Classifieds
      • Marketplace
      • PRIVATE For Sale / Trade or Buy Classifieds
      • VENDOR 'For Sale' Classifieds
    • Regional
      • US Northeast
      • US Central
      • US Southwest
      • US Western
      • US Northwest
      • US Midwest
      • US Mid Atlantic
      • US Lower Atlantic
      • US Southern Midwest
      • Canada
      • Mexico, South America
      • UK & Eire
      • Europe
      • Australia - Queensland
      • Australia - New South Wales / ACT
      • Australia - Victoria / Tasmania
      • Australia - Western
      • Australia - South / NT
      • New Zealand
      • Other Areas
    • Official Site Sponsors
      • VENDOR Threads
    • General Interest / History
      • Sights N Sounds
      • Photography
      • Forum announcement archives / Forum History
      • Jaguarforums Merchandise
      • Memorial Section
  • News
  • Marketplace
    • Vendor Directory
    • Become a Vendor
    • Member Marketplace
    • Vendor Marketplace
    • Site Store
  • New Posts
  • Tools
    • Car Payment Calculator
    • Tire Rim Calculator
    • Vin Decoder
    • Recalls
    • Technical Service Bulletins (TSBs)
    • Members List
    • Live Feed
  • Gallery
  • View Dark Mode
    • Please register or login to enable Dark Mode.
  • Log In
  • Register
Jaguar Forums - Jaguar Enthusiasts Forum
    • Threads
      • Advanced
Dark Mode

Please register or login to enable Dark Mode.

Log In

Forgot your Password?

By logging into your account, you agree to our Terms of Use and Privacy Policy, and to the use of cookies as described therein.
or
 
  • Recent
  • Commented
  • Albums
  • My Pictures

My Post Pictures

orangeblossom
May 12, 2016
 2225
 0
Sort:
Most Recent
  • Default
  • Most Recent
Nearly There! Lots of patience and a steady hand but don't cut through the Sensor Wires which are just above it.
Nearly There! Lots of patience and a steady hand but don't cut through the Sensor Wires which are just above it.
0 2016/10/31 16:17:26 orangeblos
No amount of Penetrating Oil was gonna shift that!
No amount of Penetrating Oil was gonna shift that!
0 2016/10/31 16:15:08 orangeblos
I told you they were Rusty!
I told you they were Rusty!
0 2016/10/31 16:13:48 orangeblos
Time for 'The Nuclear Option' sometimes it really is the only way.
Time for 'The Nuclear Option' sometimes it really is the only way.
0 2016/10/31 16:10:59 orangeblos
Rusted Solid on both sides and the only way to get them off was with a Cutting Disc on an Angle Grinder!
Rusted Solid on both sides and the only way to get them off was with a Cutting Disc on an Angle Grinder!
0 2016/10/31 16:08:21 orangeblos
Both Electric Motors with the Drive Fitting from the Motor on the Left.

16mm Shaft Size 45mm Outside Diameter.
Both Electric Motors with the Drive Fitting from the Motor on the Left. 16mm Shaft Size 45mm Outside Diameter.
0 2016/10/31 15:45:13 orangeblos
The Drive Fitting inside the Hydraulic Pump
Outside Diameter 45mm
The Drive Fitting inside the Hydraulic Pump Outside Diameter 45mm
0 2016/10/31 15:43:39 orangeblos
The Drive Fitting to fit on a 16mm Shaft
The Outside diameter of the Fitting is 45mm
to match up with the Fitting on the Hydraulic Pump.
The Drive Fitting to fit on a 16mm Shaft The Outside diameter of the Fitting is 45mm to match up with the Fitting on the Hydraulic Pump.
0 2016/10/31 15:38:36 orangeblos
Pulling the 16mm Drive Fitting off the Old Electric Motor
Pulling the 16mm Drive Fitting off the Old Electric Motor
0 2016/10/31 15:37:13 orangeblos
Old Electric Motor with 16mm Shaft and Fitting
Old Electric Motor with 16mm Shaft and Fitting
0 2016/10/31 15:35:47 orangeblos
No Expense spared, I bought a New Jug and Funnel especially for the occaision!
No Expense spared, I bought a New Jug and Funnel especially for the occaision!
0 2016/10/30 17:34:41 orangeblos
All mixed up and ready to go in the Rad.
All mixed up and ready to go in the Rad.
0 2016/10/30 17:24:39 orangeblos
De-ionised Water and Antifreeze already for mixing together.
De-ionised Water and Antifreeze already for mixing together.
0 2016/10/30 17:21:56 orangeblos
By Turning the Clip on the Bottom Hose, I can now reach it from the Top with a long Extension Socket which makes it a whole lot easier.
By Turning the Clip on the Bottom Hose, I can now reach it from the Top with a long Extension Socket which makes it a whole lot easier.
0 2016/10/30 17:11:35 orangeblos
The elusive hard to reach Hose Clip on the Bottom Hose.
When I drained the Water out, I turned the Clip round so I could do it up from the Top with an Extension Socket.
The elusive hard to reach Hose Clip on the Bottom Hose. When I drained the Water out, I turned the Clip round so I could do it up from the Top with an Extension Socket.
0 2016/10/30 17:08:04 orangeblos
The connection before the Water Trap is just for blowing dust off stuff, while the other one should hopefully flow Dry Air.
The connection before the Water Trap is just for blowing dust off stuff, while the other one should hopefully flow Dry Air.
0 2016/10/30 16:47:09 orangeblos
I'm hoping the 'Thing' in the middle is a Water Filter.
I'm hoping the 'Thing' in the middle is a Water Filter.
0 2016/10/30 16:45:37 orangeblos
It looked like a piece of Scrap
but not anymore!
It looked like a piece of Scrap but not anymore!
0 2016/10/30 16:24:54 orangeblos
All it needed was a Clean and it came up like new!
All it needed was a Clean and it came up like new!
0 2016/10/27 14:59:59 orangeblos
Self Reeling Compressor Hose Reel
Apart from the fact it was covered in grime it worked perfect.
Self Reeling Compressor Hose Reel Apart from the fact it was covered in grime it worked perfect.
0 2016/10/27 14:58:07 orangeblos
Is this a water drain of some sort and what does the bit on the top do?
It was on the outlet of a Big Compressor (Too Big to get in the Car, unfortunately!)
Is this a water drain of some sort and what does the bit on the top do? It was on the outlet of a Big Compressor (Too Big to get in the Car, unfortunately!)
0 2016/10/27 14:16:42 orangeblos
New 'T' piece Fitted with Safety Valve checked and Working.
New 'T' piece Fitted with Safety Valve checked and Working.
0 2016/10/25 15:23:42 orangeblos
Whoops!
Whoops!
0 2016/10/25 15:21:38 orangeblos
Looks like the Safety Valve got stuck and this was the result.
But looking on the plus side, at least she seems quite good at pumping air!
Looks like the Safety Valve got stuck and this was the result. But looking on the plus side, at least she seems quite good at pumping air!
0 2016/10/25 15:18:23 orangeblos
Oh Yeah!
That's more like it, now all you have to do is run when I plug you in.
Oh Yeah! That's more like it, now all you have to do is run when I plug you in.
0 2016/10/25 15:13:20 orangeblos
Loads of Water came out before the Oil did and to be honest things were not looking good.
Loads of Water came out before the Oil did and to be honest things were not looking good.
0 2016/10/25 15:08:02 orangeblos
Just an 'el cheapo' Tap and Die Set but it did the Job.
Just an 'el cheapo' Tap and Die Set but it did the Job.
0 2016/10/25 15:05:23 orangeblos
Was it worth as much as a 'Fiver'?
At this point I was wondering why on earth I bought it in the first place.
Was it worth as much as a 'Fiver'? At this point I was wondering why on earth I bought it in the first place.
0 2016/10/25 14:56:03 orangeblos
For Starters the Motor had to come off, which needed a FBH and a Chisel!.
For Starters the Motor had to come off, which needed a FBH and a Chisel!.
0 2016/10/25 14:53:43 orangeblos
What was left of the Mounting Bolts were so rusty and corroded that they couldn't be undone or even adjusted.
What was left of the Mounting Bolts were so rusty and corroded that they couldn't be undone or even adjusted.
0 2016/10/25 14:49:59 orangeblos
It was a whole lot worse than it looks here.
It was a whole lot worse than it looks here.
0 2016/10/25 14:46:44 orangeblos
Bleed Nipples at the Top This Time!
No wonder the Brakes took forever to bleed when last time I accidentally fitted them upside down!
Bleed Nipples at the Top This Time! No wonder the Brakes took forever to bleed when last time I accidentally fitted them upside down!
0 2016/10/23 03:50:56 orangeblos
Oh Yeah!
That looks more like it!
Oh Yeah! That looks more like it!
0 2016/10/22 15:15:07 orangeblos
Amazing Mini Blowlamp!
So useful for all sorts of stuff, available from all Cookery Stores but I nicked mine off the GF.
Amazing Mini Blowlamp! So useful for all sorts of stuff, available from all Cookery Stores but I nicked mine off the GF.
0 2016/10/22 15:10:36 orangeblos
Heating Nut with my Mini Gas Blow Torch
Also used for Browning the Top of 'Creme Brulee' apparently (Whatever they are?)
Heating Nut with my Mini Gas Blow Torch Also used for Browning the Top of 'Creme Brulee' apparently (Whatever they are?)
0 2016/10/22 15:05:27 orangeblos
No Dice with a Spanner, its time for the 'Nuclear Option!'
No Dice with a Spanner, its time for the 'Nuclear Option!'
0 2016/10/22 15:03:34 orangeblos
This Brake Nut has got to come off without damaging the Pipe, or it could be a nightmare to replace.
This Brake Nut has got to come off without damaging the Pipe, or it could be a nightmare to replace.
0 2016/10/22 15:00:40 orangeblos
Rusted Solid
Time to get the Angle Grinder out!
Rusted Solid Time to get the Angle Grinder out!
0 2016/10/22 14:57:01 orangeblos
Steering Arm Trial Fit
Steering Arm Trial Fit
0 2016/10/22 14:54:21 orangeblos
Back Plate Cleaned and Painted.
Back Plate Cleaned and Painted.
0 2016/10/22 14:44:20 orangeblos
First
Page
52 of 56
Last
Go To
Page
  • 1
  • ...
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
52 of 56
Go To GO
Go to page of 56 pages
  • 1
  • ...
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Top
Jaguar Forums - Jaguar Enthusiasts Forum
  • Contact Us
  • FAQ
  • Archive
  • Advertising
  • Cookie Policy
  • Privacy Statement
  • Terms of Service
  • Your Privacy Choices
  • Manage Preferences

© 2026 MH Sub I, LLC dba Internet Brands

Follow Us        



When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.