Jaguar Forums - Jaguar Enthusiasts Forum
Suspected cause of the leak
Suspected cause of the leak
0 2021/07/25 19:39:24
Old seal on top, new seal on bottom. Noticeably larger ID on the old seal, probably from wear
Old seal on top, new seal on bottom. Noticeably larger ID on the old seal, probably from wear
0 2021/07/25 19:39:31
New seal installed. Easy to press the old one out, and new one in with appropriately sized sockets
New seal installed. Easy to press the old one out, and new one in with appropriately sized sockets
0 2021/07/25 19:39:37
Replaced the pinion body to steering rack O ring while everything was apart, just to be safe
Replaced the pinion body to steering rack O ring while everything was apart, just to be safe
0 2021/07/25 19:39:46
0 2021/07/28 21:15:27
0 2021/08/01 20:59:46
0 2021/08/01 20:59:53
0 2021/08/28 16:47:42
click click click
click click click
0 2021/09/13 18:15:42
0 2021/10/02 13:46:53
0 2021/10/17 17:19:24
0 2021/10/17 17:22:06
0 2021/12/03 19:01:09
0 2022/01/03 20:34:38
screen of victory
screen of victory
0 2022/01/24 17:31:38
0 2022/04/07 21:22:12
0 2022/04/10 21:42:23
two is better than one
two is better than one
0 2022/04/10 21:42:24
0 2022/07/15 21:49:00
0 2022/07/18 20:56:38
0 2022/07/18 21:05:12
0 2022/07/18 21:05:13
0 2022/07/18 21:05:14
0 2022/09/03 09:37:01
0 2022/09/04 08:16:47
0 2023/01/27 20:36:06
0 2023/02/06 18:42:56
0 2023/02/06 18:43:08
0 2023/02/06 18:43:32
LED's soldered and tested
LED's soldered and tested
0 2023/02/19 11:48:54
Optics in
Optics in
0 2023/02/19 11:48:57
PCB fitted to enclosure. The optics clips managed to fit perfectly in the OEM lens, the clips on the sides just press on the plastic without force or interference.
PCB fitted to enclosure. The optics clips managed to fit perfectly in the OEM lens, the clips on the sides just press on the plastic without force or interference.
0 2023/02/19 11:49:00
Twilight shot
Twilight shot
0 2023/02/19 11:52:42
So smooth
So smooth
0 2023/02/19 11:55:33
0 2023/04/24 10:44:01
0 2023/04/30 09:09:36
Speedi sleeve on the pinion
Speedi sleeve on the pinion
0 2023/07/25 18:15:59
New seal in place
New seal in place
0 2023/07/25 18:16:00
all put together. Probably room for a 52x85x10 if needed, it opens up more options for off-the-shelf seals
all put together. Probably room for a 52x85x10 if needed, it opens up more options for off-the-shelf seals
0 2023/07/25 18:16:01
0 2023/08/07 20:03:07