Jaguar Forums - Jaguar Enthusiasts Forum
31. And the battery is out. Installation of the new battery is reversal of these steps.
31. And the battery is out. Installation of the new battery is reversal of these steps.
0 2016/10/14 10:10:46
30. Then turn and slide into the trunk area.
30. Then turn and slide into the trunk area.
0 2016/10/14 10:10:39
29. Rotate over so you can get hands under the bottom.
29. Rotate over so you can get hands under the bottom.
0 2016/10/14 10:10:08
28. Now the battery can lift up on the ledge.
28. Now the battery can lift up on the ledge.
0 2016/10/14 10:09:43
27. Move the loose positive connector away terminal away, being careful not to short it to the car body.
27. Move the loose positive connector away terminal away, being careful not to short it to the car body.
0 2016/10/14 10:09:13
26. Next the positive terminal connector comes off, the same way. Be careful not to short the positive terminal to the car.
26. Next the positive terminal connector comes off, the same way. Be careful not to short the positive terminal to the car.
0 2016/10/14 10:08:41
25. The same socket loosens the cable mount, until it is free and can be pulled off the battery terminal.
25. The same socket loosens the cable mount, until it is free and can be pulled off the battery terminal.
0 2016/10/14 10:08:13
24. Now. we pull off the cables. Negative cable first. This would be the time to make sure your battery charger is connected into the trunk connector to save your clock etc.
24. Now. we pull off the cables. Negative cable first. This would be the time to make sure your battery charger is connected into the trunk connector to save your clock etc.
0 2016/10/14 10:07:44
23. Two bolts come out to free the bracket.
23. Two bolts come out to free the bracket.
0 2016/10/14 10:07:19
22. The same socket works here but a handle driver works better.
22. The same socket works here but a handle driver works better.
0 2016/10/14 10:06:54
21. Now we must remove the side bracket.
21. Now we must remove the side bracket.
0 2016/10/14 10:06:27
20. and then the bracket can be pulled off the studs to free the batter.
20. and then the bracket can be pulled off the studs to free the batter.
0 2016/10/14 10:06:03
19. The entire bundle of cables stays together.
19. The entire bundle of cables stays together.
0 2016/10/14 10:05:58
18. The cables then can come up and off the stud.
18. The cables then can come up and off the stud.
0 2016/10/14 10:05:53
17. Then the cables slide up and off.
17. Then the cables slide up and off.
0 2016/10/14 10:05:28
16. Only the two nuts next to the cables come out.
16. Only the two nuts next to the cables come out.
0 2016/10/14 10:05:25
15. Two nuts remove to free the bracket and the cables.
15. Two nuts remove to free the bracket and the cables.
0 2016/10/14 10:05:19
14. This uses the same socket and your driver.
14. This uses the same socket and your driver.
0 2016/10/14 10:05:16
13. Now we need to take out these nuts on this bracket.
13. Now we need to take out these nuts on this bracket.
0 2016/10/14 10:04:52
12. Slide out and turn.
12. Slide out and turn.
0 2016/10/14 10:04:28
11. Once the bolts are gone the cross member is free to be removed, starting at the right side.
11. Once the bolts are gone the cross member is free to be removed, starting at the right side.
0 2016/10/14 10:04:05
10. The bolts are fairly long but will wind out.
10. The bolts are fairly long but will wind out.
0 2016/10/14 10:03:33
9. And two more bolts to remove at the right side.
9. And two more bolts to remove at the right side.
0 2016/10/14 10:03:04
8. There are two bolts to remove with your socket on the left side.
8. There are two bolts to remove with your socket on the left side.
0 2016/10/14 10:02:40
7. Now this cross member must come out.
7. Now this cross member must come out.
0 2016/10/14 10:02:19
6. You will need a 10 mm socket and driver, and preferably a handle too.
6. You will need a 10 mm socket and driver, and preferably a handle too.
0 2016/10/14 10:02:13
5. Now the battery cover can be removed.
5. Now the battery cover can be removed.
0 2016/10/14 10:01:53
4. And then finally the bottom right.
4. And then finally the bottom right.
0 2016/10/14 10:01:46
3. Then remove from the bottom left.
3. Then remove from the bottom left.
0 2016/10/14 10:01:37
2. Then remove from the top left.
2. Then remove from the top left.
0 2016/10/14 10:01:09
1. First remove the plastic nuts holding the battery cover. Start at the top right...
1. First remove the plastic nuts holding the battery cover. Start at the top right...
0 2016/10/14 10:00:50