Jaguar Forums - Jaguar Enthusiasts Forum
These are the seats from the X351, showing the control elements (switch pack).
These are the seats from the X351, showing the control elements (switch pack).
0 2017/04/21 16:13:54
Here is a description of my wiring problem for seat exchange. More info in other files...
Here is a description of my wiring problem for seat exchange. More info in other files...
0 2017/05/07 08:00:45
Official Jaguar seat wiring diagrams with comparison of my connections
Official Jaguar seat wiring diagrams with comparison of my connections
0 2017/05/07 08:00:48
summary of wiring in the 3 "seat to car" connections with wire colours and positions
summary of wiring in the 3 "seat to car" connections with wire colours and positions
0 2017/05/07 08:00:49
pictures of my current 2011 XF car and original seat connections
pictures of my current 2011 XF car and original seat connections
0 2017/05/07 08:00:52
0 2017/05/07 09:54:51
0 2017/05/10 04:44:14
drill holes at corners of 30 x 46 mm rectangle and cut out with small, sharp knife. I cut from behind to avoid potentially damaging the plastic.
drill holes at corners of 30 x 46 mm rectangle and cut out with small, sharp knife. I cut from behind to avoid potentially damaging the plastic.
0 2017/05/13 13:04:02
Inserted the housing of the switch into the hole, after making a few adjustments to the shape.
Inserted the housing of the switch into the hole, after making a few adjustments to the shape.
0 2017/05/13 13:04:08
Inserted the switch into the housing
Inserted the switch into the housing
0 2017/05/13 13:04:15
View of the installed switch from behind the door panel
View of the installed switch from behind the door panel
0 2017/05/13 13:04:20
The wire for connecting to the memory switch (hanging down) is just long enough to reach the position at the top left of the speaker as viewed here.
The wire for connecting to the memory switch (hanging down) is just long enough to reach the position at the top left of the speaker as viewed here.
0 2017/05/13 13:04:26
Install door panel and ready to memorise. Actually will have to wait for my harnesses to arrive before I can install my memory seats and test.
Install door panel and ready to memorise. Actually will have to wait for my harnesses to arrive before I can install my memory seats and test.
0 2017/05/13 13:04:32
new harness for connector A at bottom, with the 3 ground wires exchanged in same positions.
new harness for connector A at bottom, with the 3 ground wires exchanged in same positions.
0 2017/05/15 13:47:08
view from the back of the new and original connector A harnesses
view from the back of the new and original connector A harnesses
0 2017/05/15 13:47:14
now the new harness with the 3 power (B+) wires also transferred
now the new harness with the 3 power (B+) wires also transferred
0 2017/05/15 13:47:19
just kept the original harness attached to seat with the remaining 5 wires that I did not attempt to transfer
just kept the original harness attached to seat with the remaining 5 wires that I did not attempt to transfer
0 2017/05/15 13:47:25
these are the 5 wires remaining in the original harness
these are the 5 wires remaining in the original harness
0 2017/05/15 13:47:29
0 2017/06/01 14:12:33
0 2017/06/18 04:18:16
Here is the tuning chip from a company in the UK. Cost about £ 140.
Here is the tuning chip from a company in the UK. Cost about £ 140.
0 2017/06/19 13:17:46
The copper of 2 of the wires became exposed. Presume it was against something too hot (was not near moving parts).
The copper of 2 of the wires became exposed. Presume it was against something too hot (was not near moving parts).
0 2017/06/19 13:17:49
looks to me like the 2 wires on left and 2 wires on right are connected together by the plug.
looks to me like the 2 wires on left and 2 wires on right are connected together by the plug.
0 2017/06/19 13:55:11
power plug of X351 seat. Yellow/red and brown/red wires are
power plug of X351 seat. Yellow/red and brown/red wires are
0 2020/06/18 04:56:03
comparison of new and original DFP system. Front pipes on new one too long!
comparison of new and original DFP system. Front pipes on new one too long!
0 2020/11/10 04:08:33
0 2020/11/10 04:13:58
2nd temp sensor attached after DFF unit on original system
2nd temp sensor attached after DFF unit on original system
0 2020/11/10 04:20:16
sensor penetrates more than half diameter into the pipe
sensor penetrates more than half diameter into the pipe
0 2020/11/10 04:20:17