My Post Pictures

May 22, 2017

20

0

0 2017/05/22 10:16:50 Jay48

0 2017/05/23 15:09:06 Jay48

0 2017/05/24 14:10:29 Jay48

0 2017/05/24 14:11:19 Jay48

0 2017/05/24 14:15:02 Jay48

Not the left side.

Not the left side.

0 2017/05/24 14:15:30 Jay48

0 2017/05/24 14:18:59 Jay48

0 2017/05/24 14:19:29 Jay48

0 2017/05/24 14:25:37 Jay48

Just the scrape method.

Just the scrape method.

0 2017/05/24 14:37:56 Jay48

Broke out the pencil solderer and some solder wick to remove the excess.

Broke out the pencil solderer and some solder wick to remove the excess.

0 2017/05/24 14:38:36 Jay48

Rt fender Buckeyes and the inner seam separated about 1/4 inch.

Rt fender Buckeyes and the inner seam separated about 1/4 inch.

0 2020/04/26 12:30:16 Jay48

In the trunk looking at the seam.

In the trunk looking at the seam.

0 2020/04/26 12:31:33 Jay48

That’s a nickel in the frame about a foot from the rear wall.

That’s a nickel in the frame about a foot from the rear wall.

0 2020/04/26 12:33:36 Jay48

That’s the right rear tail light bracket.

That’s the right rear tail light bracket.

0 2020/04/26 12:35:18 Jay48

The bottom lip of the trunk is a pretty complex bend - might drill out the spot welds and weld a donor piece from Jag 2. Additional, you can see the right side is up maybe a couple of inches.

The bottom lip of the trunk is a pretty complex bend - might drill out the spot welds and weld a donor piece from Jag 2. Additional, you can see the right side is up maybe a couple of inches.

0 2020/04/26 12:37:07 Jay48

0 2020/06/27 13:28:32 Jay48

Separating the parts

Separating the parts

0 2020/07/05 12:59:43 Jay48

Tried to hold the car in place.

Tried to hold the car in place.

0 2020/08/02 11:18:15 Jay48

The unibody seam bent.

The unibody seam bent.

0 2020/08/02 11:18:20 Jay48