Jaguar Forums - Jaguar Enthusiasts Forum
You need one of these to work on Jags I'm afraid. Not cheap but I got it to run the cloned IDS SDD
You need one of these to work on Jags I'm afraid. Not cheap but I got it to run the cloned IDS SDD
0 2022/08/01 19:50:27
Success.... then off? Battery voltage had fallen below 12.5V on my marginal battery.
Success.... then off? Battery voltage had fallen below 12.5V on my marginal battery.
0 2022/08/01 19:50:20
Remove the XF unit cradle, the holes line up with the XK frame
Remove the XF unit cradle, the holes line up with the XK frame
0 2022/08/01 19:50:02
2 small, T20 at the top followed by 4, T27 screws. You will have to remove a trim clip at the top and the unit will slide out
2 small, T20 at the top followed by 4, T27 screws. You will have to remove a trim clip at the top and the unit will slide out
0 2022/08/01 19:49:29
Plug and play
Plug and play
0 2022/08/01 19:48:42
Hopefully you can read the relevant serial Numbers
Hopefully you can read the relevant serial Numbers
0 2022/08/01 19:48:18
Glossy cat
Glossy cat
0 2017/10/05 10:30:19
0 2017/10/05 10:29:49
0 2017/10/05 03:27:45
0 2017/10/05 03:27:17
Atlas Quick Lift, 43 inches, 7000 lbs
Atlas Quick Lift, 43 inches, 7000 lbs
0 2017/10/05 03:26:53
0 2017/10/05 03:25:25
0 2017/10/05 03:25:06
0 2017/10/05 03:24:14
0 2017/10/05 03:16:30
0 2017/10/05 03:15:49
0 2017/10/05 03:15:40
0 2017/10/05 03:15:08
first wash
first wash
0 2017/10/05 03:14:14
The mighty AJ133, my X358 background
The mighty AJ133, my X358 background
0 2017/10/05 03:13:25
New to me
New to me
0 2017/10/05 03:13:17
Jaguar Classic XKR at Castle Bromwich plant 110 miles on clock
Jaguar Classic XKR at Castle Bromwich plant 110 miles on clock
0 2017/10/05 03:12:58
0 2017/10/05 03:11:23
Angus, Gulf of Mexico, GPT
Angus, Gulf of Mexico, GPT
0 2014/12/19 09:16:38
Angus - late 2008 model VDP
Angus - late 2008 model VDP
0 2014/12/19 09:16:14
West Florida, my first XJ
West Florida, my first XJ
0 2014/12/19 09:16:00
0 2014/12/19 09:13:34
IMG 1045I made them so I could disconnect the incline from the platform section. They are attached by a cleat on the bottom and clevis pin and guide on the vertical upright.
IMG 1045I made them so I could disconnect the incline from the platform section. They are attached by a cleat on the bottom and clevis pin and guide on the vertical upright.
0 2014/11/22 12:28:13
IMG 1044 Saves time jacking when all you want to do is an oil change.
IMG 1044 Saves time jacking when all you want to do is an oil change.
0 2014/11/22 12:28:13
IMG 0842 I move them with a trolly.
IMG 0842 I move them with a trolly.
0 2014/11/22 12:28:13