Jaguar Forums - Jaguar Enthusiasts Forum
0 2020/04/19 00:28:17
0 2020/04/19 00:28:06
0 2019/11/22 14:42:07
0 2019/11/22 14:42:02
0 2019/11/22 14:41:57
0 2019/11/22 14:41:52
0 2019/11/22 14:41:44
0 2019/11/22 14:41:36
0 2019/11/22 14:41:30
0 2019/11/22 14:41:25
0 2019/11/22 14:41:17
0 2019/11/22 14:41:09
0 2019/11/22 14:41:03
0 2019/11/22 14:40:56
The BEFORE shot.
The BEFORE shot.
0 2017/08/14 03:41:07
The AFTER shot. Not as much glare and nice balance of light and colour.
The AFTER shot. Not as much glare and nice balance of light and colour.
0 2017/08/14 03:38:47
Off the shelf from Super Cheap Autos (no plug intended).
Off the shelf from Super Cheap Autos (no plug intended).
0 2017/08/14 03:33:42
In the garage at night and the garage overhead light on, but these 3 watt LED units are lighting up the rear pretty seriously.
In the garage at night and the garage overhead light on, but these 3 watt LED units are lighting up the rear pretty seriously.
0 2017/08/14 03:23:36
Wow, they look bright!
Wow, they look bright!
0 2017/08/14 03:22:05
2nd version LED unit, but at 3 watts (right) with stock bulb/unit at 5 watts.
2nd version LED unit, but at 3 watts (right) with stock bulb/unit at 5 watts.
0 2017/08/14 03:18:28
Stock incandescent unit on left, new LED unit on the right.
Stock incandescent unit on left, new LED unit on the right.
0 2017/08/14 03:12:52
The black ring near the base of the bulb is heat degradation on the socket
The black ring near the base of the bulb is heat degradation on the socket
0 2017/08/14 03:09:26
All bulbs close to the same colour. LEDS look brighter but that could be the angle of view.
All bulbs close to the same colour. LEDS look brighter but that could be the angle of view.
0 2017/05/20 21:55:29
High beam with both Xenon and LEDs active. You can almost smell the fence burning! LoL
High beam with both Xenon and LEDs active. You can almost smell the fence burning! LoL
0 2017/05/20 21:49:49
Low beam Xenon HIDs, stock on my vehicle.
Low beam Xenon HIDs, stock on my vehicle.
0 2017/05/20 21:48:53
The drivers side of a RHD vehicle with the new LED in the high beam. Colour matches well.
The drivers side of a RHD vehicle with the new LED in the high beam. Colour matches well.
0 2017/05/20 21:44:21
This was the stock halogen high beam and stock Xenon low beam on the passenger side of a RHD vehicle. It was such a contrast, I could notice it while driving.
This was the stock halogen high beam and stock Xenon low beam on the passenger side of a RHD vehicle. It was such a contrast, I could notice it while driving.
0 2017/05/20 21:42:18
The cables were routed around the top of the outside of the high beam reflector. The other cables were bunched together and tied with a single plastic tie, also provided with the kit.
The cables were routed around the top of the outside of the high beam reflector. The other cables were bunched together and tied with a single plastic tie, also provided with the kit.
0 2017/05/20 21:37:46
The LED driver was secured with a double sided sticky pad that came with the kit.
The LED driver was secured with a double sided sticky pad that came with the kit.
0 2017/05/20 21:37:13
Drivers side (left of pic) done. Looks whiter than the left and also considerably brighter, though hard to see in the pic.
Drivers side (left of pic) done. Looks whiter than the left and also considerably brighter, though hard to see in the pic.
0 2017/05/20 21:33:28
The rotate 45 degrees clockwise until you feel a slight click. Finger tight force needed, not ultra male hormone tight!
The rotate 45 degrees clockwise until you feel a slight click. Finger tight force needed, not ultra male hormone tight!
0 2017/05/20 21:29:34
LED bulb on a 45 degree angle as it goes in.
LED bulb on a 45 degree angle as it goes in.
0 2017/05/20 21:29:15
All connections made. The LED driver connection to the LED bulb was hanging out of view. It was keyed and once located, it slid into place with firm pressure.
All connections made. The LED driver connection to the LED bulb was hanging out of view. It was keyed and once located, it slid into place with firm pressure.
0 2017/05/20 21:24:53
LED driver cable connected to standard H7 connector. The standard H7 connector was not modified at all to facilitate return to standard halogens if needed.
LED driver cable connected to standard H7 connector. The standard H7 connector was not modified at all to facilitate return to standard halogens if needed.
0 2017/05/20 21:22:42
The keyed slots are at a 45 degree angle from vertical or horizontal. Stock tension on the screws were not changed. Would need a special star head screw driver to do so.
The keyed slots are at a 45 degree angle from vertical or horizontal. Stock tension on the screws were not changed. Would need a special star head screw driver to do so.
0 2017/05/20 21:17:54
Mated Adaptor correctly installed with the metal tabs seated firmly under the screws. Can also see the keyed slots inside the LED barrel socket.
Mated Adaptor correctly installed with the metal tabs seated firmly under the screws. Can also see the keyed slots inside the LED barrel socket.
0 2017/05/20 21:15:43
Metal Adaptor and LED barrel socket mated.
Metal Adaptor and LED barrel socket mated.
0 2017/05/20 21:08:39
Metal Adaptor fitted over plastic LED barrel socket for fitting into the high beam housing.
Metal Adaptor fitted over plastic LED barrel socket for fitting into the high beam housing.
0 2017/05/20 21:08:05
Metal Adaptor fitted over plastic LED barrel socket for fitting into the high beam housing.
Metal Adaptor fitted over plastic LED barrel socket for fitting into the high beam housing.
0 2017/05/20 20:45:37
Stock headlight assembly with H7 high beam bulb removed, LED Driver cable plugged into stock high beam bulb connector.
Stock headlight assembly with H7 high beam bulb removed, LED Driver cable plugged into stock high beam bulb connector.
0 2017/05/20 20:39:08