Jaguar Forums - Jaguar Enthusiasts Forum
Wadding wrapped and tied off.
Wadding wrapped and tied off.
0 2017/07/27 13:44:17
2" (50mm) length of perforated stainless pipe tacked into place.
2" (50mm) length of perforated stainless pipe tacked into place.
0 2017/07/27 13:44:04
Ready for a new single pipe section.
Ready for a new single pipe section.
0 2017/07/27 13:34:46
Underneath the wadding the internal pipe goes up and down three times.
Underneath the wadding the internal pipe goes up and down three times.
0 2017/07/27 13:34:34
Now for the fun part
Now for the fun part
0 2017/07/27 13:32:56
Half a line visible.
Half a line visible.
0 2017/07/27 13:32:07
All ready to fit...when they're dry of course.
All ready to fit...when they're dry of course.
0 2017/07/19 08:13:21
Good opportunity to clean the area.
Good opportunity to clean the area.
0 2017/07/18 08:03:41
Throttle open and you can see the grime,although not a great deal I gave it a good clean anyway.
Throttle open and you can see the grime,although not a great deal I gave it a good clean anyway.
0 2017/07/18 07:59:45
Throttle closed.
Throttle closed.
0 2017/07/18 07:59:33
Two pipes,two sensors and a 10mm nut freed up this end of the air intake.
Two pipes,two sensors and a 10mm nut freed up this end of the air intake.
0 2017/07/18 07:55:43
Pick some pipes and some sensor connectors and pull them off.
Pick some pipes and some sensor connectors and pull them off.
0 2017/07/18 07:52:38
All done.
All done.
0 2017/07/18 07:38:00
The other end of the new earth strap fitted nicely here.
The other end of the new earth strap fitted nicely here.
0 2017/07/18 07:37:50
Taped over and held out of the way.
Taped over and held out of the way.
0 2017/07/18 07:36:21
Cleaned up.
Cleaned up.
0 2017/07/18 07:36:11
Unfortunately glass fibre doesn't quite work for an earthing point.
Unfortunately glass fibre doesn't quite work for an earthing point.
0 2017/07/17 12:17:53
Not pretty but it will stop the joins from rusting.
Not pretty but it will stop the joins from rusting.
0 2017/07/14 13:37:44
New pipes in place.
New pipes in place.
0 2017/07/14 13:35:51
Having the overlap made welding the joins much easier.
Having the overlap made welding the joins much easier.
0 2017/07/14 13:29:56
All gone.
All gone.
0 2017/07/14 13:24:50
The two middle silencers.
The two middle silencers.
0 2017/07/14 13:19:41
0 2017/07/06 09:18:02
0 2017/07/06 09:17:48
0 2017/07/06 09:17:37
Same process for this side.
Same process for this side.
0 2017/07/06 09:00:28
Three coats did the job.
Three coats did the job.
0 2017/07/06 09:00:16
Forgot about the handles to start with.
Forgot about the handles to start with.
0 2017/07/06 09:00:04
The onto the satin black
The onto the satin black
0 2017/07/06 08:59:51
1st coat of etch primer
1st coat of etch primer
0 2017/07/06 08:59:38
99% done.
99% done.
0 2017/07/03 11:01:26
Screwdriver and a bit of persuasion et voila. This part wasn't glued or bonded so came apart easily
Screwdriver and a bit of persuasion et voila. This part wasn't glued or bonded so came apart easily
0 2017/07/03 10:55:49
Perfect fit.
Perfect fit.
0 2017/07/03 10:54:01
Nothing fancy,just used a wood saw and cleaned the edges up with some sandpaper.
Nothing fancy,just used a wood saw and cleaned the edges up with some sandpaper.
0 2017/07/03 10:28:02
Needed to cut as close to the main part of the base.
Needed to cut as close to the main part of the base.
0 2017/07/03 10:27:48
The securing bolt decided to come off also,bit of super glue sorted that.
The securing bolt decided to come off also,bit of super glue sorted that.
0 2017/07/03 10:25:20
Top section and filter removed.
Top section and filter removed.
0 2017/07/03 10:22:16
Here's what we started with.
Here's what we started with.
0 2017/07/03 10:19:33
From left to right. Pipercross, K&N, Ash.
From left to right. Pipercross, K&N, Ash.
0 2017/07/03 09:56:52
.
.
0 2017/07/01 09:17:22