Jaguar Forums - Jaguar Enthusiasts Forum
0 2022/10/30 18:53:50
Engine and trans complete starter, Alt.
Engine and trans complete starter, Alt.
0 2022/10/30 18:53:32
Clean and neat.
Clean and neat.
0 2022/07/17 18:39:46
Engine is still in car, can pull anytime.
Engine is still in car, can pull anytime.
0 2022/07/17 18:38:47
0 2019/05/11 17:18:51
0 2019/05/11 17:18:19
0 2019/05/01 18:42:19
0 2019/04/27 15:26:27
0 2019/04/27 15:26:00
0 2019/02/09 16:20:57
0 2019/02/09 16:20:35
0 2019/02/09 16:20:20
0 2019/02/09 16:20:08
0 2019/02/09 16:19:50
0 2019/02/09 16:19:28
0 2019/01/13 20:10:51
0 2019/01/13 20:10:39
0 2019/01/13 20:10:08
0 2018/12/07 21:16:52
This is what it looked like before I cut the bubble out all I did was remove the bubble and cut it flush with the frame rail.
This is what it looked like before I cut the bubble out all I did was remove the bubble and cut it flush with the frame rail.
0 2018/12/07 21:15:53
Good clearance
Good clearance
0 2018/12/02 18:13:04
Lots of clearance may even be able to drop starter when done
Lots of clearance may even be able to drop starter when done
0 2018/12/02 18:12:55
Backside
Backside
0 2018/12/02 18:12:34
Turn down added
Turn down added
0 2018/12/02 18:12:25
Wide open!
Wide open!
0 2018/12/02 18:11:59
Mocked up and tack welded
Mocked up and tack welded
0 2018/12/02 18:11:41
0 2018/12/02 18:11:23
Ovaled to match the flange
Ovaled to match the flange
0 2018/12/02 18:11:01
Start of the head pipes
Start of the head pipes
0 2018/12/02 18:10:51
0 2018/12/02 18:03:43
Nice clearance, I may even be able to remove the starter without dropping the header.
Nice clearance, I may even be able to remove the starter without dropping the header.
0 2018/12/02 17:56:41
Note marks for pie cut, since it's pretty much pointed at the ground.
Note marks for pie cut, since it's pretty much pointed at the ground.
0 2018/12/02 17:56:32
Still lots of finish work to be done but you get the idea.
Still lots of finish work to be done but you get the idea.
0 2018/12/02 17:56:16
Very wide open!
Very wide open!
0 2018/12/02 17:56:01
Mocked up and tack welded
Mocked up and tack welded
0 2018/12/02 17:55:49
Ovaled end of pipe to match flange
Ovaled end of pipe to match flange
0 2018/12/02 17:55:18
0 2018/12/02 17:55:02
This is the start of the head pipes, gathered from my buddy's salvage yard.
This is the start of the head pipes, gathered from my buddy's salvage yard.
0 2018/12/02 17:54:48
0 2018/11/04 17:22:18
0 2018/11/04 17:22:10