Jaguar Forums - Jaguar Enthusiasts Forum
0 2025/06/19 16:18:41
0 2025/03/12 10:11:25
0 2025/03/04 13:16:12
After removing the cables and the (2) 10mm stud nuts, you will see a pair of black tabs that must be squeezed together in order to allow the meatal base plate to be removed. Once the plate is removed, your antenna unit will be free to replace.
After removing the cables and the (2) 10mm stud nuts, you will see a pair of black tabs that must be squeezed together in order to allow the meatal base plate to be removed. Once the plate is removed, your antenna unit will be free to replace.
0 2024/11/17 17:13:12
You will have to pull each white tab up in order for the data cable to release and allow its removal from the antenna
You will have to pull each white tab up in order for the data cable to release and allow its removal from the antenna
0 2024/11/17 17:10:33
To remove the data cables, you must first access the white release tab. In my case, I had to rotate each cable to get to the release tab ....
To remove the data cables, you must first access the white release tab. In my case, I had to rotate each cable to get to the release tab ....
0 2024/11/17 17:08:34
Once the panel is free, you will find data cables attached to the antenna that must be unplugged before you can remove the panel and access the antenna
Once the panel is free, you will find data cables attached to the antenna that must be unplugged before you can remove the panel and access the antenna
0 2024/11/17 17:06:13
Here is a pic of the complete antenna panel from the coupe that must be removed. Note: there are (6) 10mm nuts that have to be removed before you can pry the panel up from the plastic clips. (2) nuts are openly accessed from the top edge of the rear hatch, and there are (2) more nuts on each side of the edge of the hatch underneath a small pop-out plastic cover.
Here is a pic of the complete antenna panel from the coupe that must be removed. Note: there are (6) 10mm nuts that have to be removed before you can pry the panel up from the plastic clips. (2) nuts are openly accessed from the top edge of the rear hatch, and there are (2) more nuts on each side of the edge of the hatch underneath a small pop-out plastic cover.
0 2024/11/17 17:05:13
0 2024/11/17 17:04:25
Sample pic of the SVR wheels I am searching for
Sample pic of the SVR wheels I am searching for
0 2024/10/10 00:27:31
0 2024/03/12 10:51:15
0 2024/02/28 15:31:39
0 2024/02/28 15:31:34
0 2023/12/19 10:48:04
0 2023/12/19 10:46:41
Sunrise in Malibu …..
Sunrise in Malibu …..
0 2023/12/19 10:46:35
0 2023/12/19 10:46:26
0 2023/12/19 10:46:18
0 2023/11/14 13:01:50
0 2023/11/14 13:01:41
0 2023/11/14 13:01:31
0 2023/08/21 01:33:27
0 2023/08/21 01:12:34
ANNNNND ... a photo of all three components installed. As mentioned, all the connections are plug-n-play when replacing the oem wing and motor over to the SVR assembly.
ANNNNND ... a photo of all three components installed. As mentioned, all the connections are plug-n-play when replacing the oem wing and motor over to the SVR assembly.
0 2023/08/18 21:45:59
Here is a photo of the deck lid and motor assembly installed, waiting to receive the bolt-on rear SVR wing
Here is a photo of the deck lid and motor assembly installed, waiting to receive the bolt-on rear SVR wing
0 2023/08/18 21:44:43
Here is a photo of the deck lid and SVR motor assembly / articulating arms I had purchased (used) when I upgraded my "R" to include an SVR wing. I had to paint my deck lid cover to match my car color.
Here is a photo of the deck lid and SVR motor assembly / articulating arms I had purchased (used) when I upgraded my "R" to include an SVR wing. I had to paint my deck lid cover to match my car color.
0 2023/08/18 21:41:59
This is an example of the deck lid that provides housing for the articulating arms of the SVR motor assembly. Note the black "pod" type covers molded into the lid.
This is an example of the deck lid that provides housing for the articulating arms of the SVR motor assembly. Note the black "pod" type covers molded into the lid.
0 2023/08/18 21:40:09
It was a fun project and I think I'm really going to enjoy the finished product. Best of all, I saved a TON of $ by finding this wing at a used auto parts business!
It was a fun project and I think I'm really going to enjoy the finished product. Best of all, I saved a TON of $ by finding this wing at a used auto parts business!
0 2023/05/09 21:50:33
After the soft fitting, parts will be removed and sent to the painter. I'm still debating if I should paint the lower wind deflector or not (I kinda dig it in black) ......
After the soft fitting, parts will be removed and sent to the painter. I'm still debating if I should paint the lower wind deflector or not (I kinda dig it in black) ......
0 2023/05/09 21:48:27
And from that point on, everything was plug and play. Here is a "soft fitting" of the wing.
And from that point on, everything was plug and play. Here is a "soft fitting" of the wing.
0 2023/05/09 21:47:19
Once the wing was deployed, the project could continue. After removing the wing, I was able to remove the cover plate and then unscrew and remove the actuator assembly ....
Once the wing was deployed, the project could continue. After removing the wing, I was able to remove the cover plate and then unscrew and remove the actuator assembly ....
0 2023/05/09 21:45:45
I ended up cutting an access hole from the hatch interior so that I could get to these wires and apply 12V to the actuator motor, deploying the wing .....
I ended up cutting an access hole from the hatch interior so that I could get to these wires and apply 12V to the actuator motor, deploying the wing .....
0 2023/05/09 21:43:58
The wing needed to be activated into the open position so that the wing mounted screws could be accessed, allowing removal of the wing
The wing needed to be activated into the open position so that the wing mounted screws could be accessed, allowing removal of the wing
0 2023/05/09 21:42:20
The hatch arrived with the wing in the closed position. In this position, the wing cannot be removed, causing the issue that started this thread.
The hatch arrived with the wing in the closed position. In this position, the wing cannot be removed, causing the issue that started this thread.
0 2023/05/09 21:40:50
Shipment received! The fun begins .....
Shipment received! The fun begins .....
0 2023/05/09 21:38:48
0 2023/05/09 21:38:21
0 2023/04/25 14:28:45
0 2023/04/25 14:28:34
0 2023/04/25 14:28:08
0 2023/04/25 14:27:51