Simonusa0's Photos

View Profile

Equalizer function

Equalizer function

0 2023/10/04 11:23:13 Simonusa0

Automatic mic calibration

Automatic mic calibration

0 2023/10/04 11:23:06 Simonusa0

My Dynamic setup has to be turned off, otherwise the screen is unresponsive

My Dynamic setup has to be turned off, otherwise the screen is unresponsive

0 2023/10/04 11:23:00 Simonusa0

This is where the loom should come out inside the console

This is where the loom should come out inside the console

0 2023/10/04 11:22:56 Simonusa0

unravel some of the loom tape to extend the overall length (reduce the 'Y" part)

unravel some of the loom tape to extend the overall length (reduce the 'Y" part)

0 2023/10/04 11:18:21 Simonusa0

Loom as supplied

Loom as supplied

0 2023/10/04 11:18:13 Simonusa0

This is the V6….There are 4 torx bolts each intercooler holding it to the cover. Probably a gasket too where the water feeds poke through the cover each side.
However masking up as you planned should work.

This is the V6….There are 4 torx bolts each intercooler holding it to the cover. Probably a gasket too where the water feeds poke through the cover each side. However masking up as you planned should work.

0 2023/06/13 10:29:53 Simonusa0

Judging from your diagram your numbering appears to be incorrect so you may have replaced the wrong injector. This photo is from the workshop manual.

Judging from your diagram your numbering appears to be incorrect so you may have replaced the wrong injector. This photo is from the workshop manual.

0 2023/05/15 13:51:33 Simonusa0

0 2023/05/01 15:39:33 Simonusa0

0 2023/04/25 14:47:52 Simonusa0

Coolant Temp at 226F while causing in rain at outside temp of 50F

Coolant Temp at 226F while causing in rain at outside temp of 50F

0 2023/04/25 14:46:06 Simonusa0

Evidence of leak at joint

Evidence of leak at joint

0 2023/02/21 07:12:58 Simonusa0

Circled leak connection

Circled leak connection

0 2023/02/21 07:12:53 Simonusa0

Page
2 of 2

Go To
Page

Go to page of 2 pages

1
2