I am finally at the point where the car is ready for the upholsterer. Its been quite an experience getting it there.
As I started to mock up the top frame I realized one of the cantrail retainers was missing.
All I can figure is that it got lost at the powder coaters and I overlooked it when I picked up the parts.
Anyhow I quickly discovered that none of the major US based vendors stocked it.
Before I go to try to have one fabricated I thought I'd reach out to the forum for suggestions on where I could look to source one or maybe someone might actually have one.
Please if you can assist in any way let me know.
I have attached a picture of the of the 3 retainers I have.
The missing one is the mate to the single short one
I have also attached a picture of my car showing its present state.
Thank you very much

ready for upholsterer

missing mate to small one
.

 

If it will help it is the second one from the front on the left. I believe the part number is BD-19256.
Please help in any way. Thank you.