1992 4.0l xjs
Junior Member
Joined: Sep 2012
Posts: 25
Likes: 2
From: San Antonio, TX
You posted a few weeks ago so maybe you have it sorted alredy, but...
The crankshaft position sensor is in the front of, or just in front of, the block on the bottom by the crank dampener and pulley. It is the only sensor in that area, so easy to identify / locate. The 6cyl I'm not 100%, but on my 94 xj v12 the cps is on a bracket between the block and the pulley on the bottom, and also has a crankshaft / engine speed sensor mounted in the bottom of the trans bell housing that reads the flywheel.
Good luck. Wes.
The crankshaft position sensor is in the front of, or just in front of, the block on the bottom by the crank dampener and pulley. It is the only sensor in that area, so easy to identify / locate. The 6cyl I'm not 100%, but on my 94 xj v12 the cps is on a bracket between the block and the pulley on the bottom, and also has a crankshaft / engine speed sensor mounted in the bottom of the trans bell housing that reads the flywheel.
Good luck. Wes.
Thread
Thread Starter
Forum
Replies
Last Post
SouthernGypsy
XJS ( X27 )
14
Sep 23, 2015 04:06 AM
NTL1991
XJ40 ( XJ81 )
6
Sep 20, 2015 06:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
