Rotary Gear on Jag XF .. stuck in D - Drive
Joined: Dec 2011
Posts: 120,439
Likes: 17,003
From: Durham, UK
Welcome to the forum Mike,
The only information I can find is you are in the UK. The vehicle could be a 2007-2015 X250 or a 2015 onwards X260 - it could be petrol or it could be diesel .......
Assuming the engine has started, the rotary selector risen and D selected then the engine can be stopped. Once the engine is stopped the selector will automatically reset to the P position and the transmission park lock will be engaged. The normal start procedure can then be repeated.
If the transmission will then only go into D (R unavailable), there must be an interlock or TCM (Transmission Control Module) fault.
Please follow this link New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum to the New Member Area - Intro a MUST forum and post some information about yourself and your vehicle for all members to see. In return you'll get a proper welcome and some useful advice about posting to the forum.
Graham
The only information I can find is you are in the UK. The vehicle could be a 2007-2015 X250 or a 2015 onwards X260 - it could be petrol or it could be diesel .......
Assuming the engine has started, the rotary selector risen and D selected then the engine can be stopped. Once the engine is stopped the selector will automatically reset to the P position and the transmission park lock will be engaged. The normal start procedure can then be repeated.
If the transmission will then only go into D (R unavailable), there must be an interlock or TCM (Transmission Control Module) fault.
Please follow this link New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum to the New Member Area - Intro a MUST forum and post some information about yourself and your vehicle for all members to see. In return you'll get a proper welcome and some useful advice about posting to the forum.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
Sprocket
PRIVATE For Sale / Trade or Buy Classifieds
0
Feb 20, 2009 06:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
