Hi,

Who can help me? I have some gearbox assembly problems:

1. in the top cover are two ***** (#32) between the rods of the selector arrangement. How can they be mounted so they will not always fall down and how must be the position of the changespeed forks (#23, 24 and 25) when mounting the cover to the gearbox?

2. what position must the gears (#6, 16 and 24) in the gearbox have, so the cover can be mounted?

Thank you!

Regards,
Oliver

 

Use grease on bearing/*****. All else goes in exactly like picture. If mainshaft is assembled and in block, top will slide right into place. You can see where forks go when installing.