Hello everyone,
I'm just registered on your forum.
I'm a french man and I'm sorry, my English language is not very top, I beg your pardon.
My problem is following :
I have recovered recently my Daimler 2,5 V8 saloon wich have been rebuild but in part only, because of the bankrupt of the workshop.
Unfortunately, some parts are missing and I have difficulties to terminate the work by myself.
An hydraulic powersteering, baught from Manners brothers, has been fitted, but the hydraulic hose are not connected and one is missing.
I don't know where connect them (from pump to steering rack or to oil tank...)
I would be very happy if you could help me with a diagram.
I have asked Manners, without response.
Thank you very much for your help.

 

Just seen your post re hoses PAS. Did you resolve the problem?. If not I will check mine and reply
barry

 

Thank you very much for your answer, Barry, yes, the problem is resoved ; in fact, the diameter of each connexion is différent on the rack, and a misfiting is impossible.
And I have found the right man to make the missing pipes and hoses.
I have fitted an oil radiator and the power steering works nicely.