hi
Joined: Dec 2011
Posts: 120,439
Likes: 17,003
From: Durham, UK
Welcome to the forum hirev,
Good to have you with us at Jaguar forums.
I know you've already found your way to the XK8/XKR forum so there's no need for a link to it from me. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Western Region forum by following this link https://www.jaguarforums.com/forum/western-us-ak-ca-nv-ut-hi-wa-id-38/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
I know you've already found your way to the XK8/XKR forum so there's no need for a link to it from me. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Western Region forum by following this link https://www.jaguarforums.com/forum/western-us-ak-ca-nv-ut-hi-wa-id-38/ to find other members in your region.
Enjoy the forums.
Graham
Joined: Feb 2010
Posts: 28,772
Likes: 11,260
From: Adelaide Stralia
Trending Topics
Joined: Oct 2007
Posts: 120,950
Likes: 6,647
From: PHX some of the time
Welcome to Jaguar Forums hirev,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Thread Starter
|
Senior Member
Joined: Sep 2016
Posts: 203
Likes: 32
99 xk8 fault codes
got the car back from the shop, they replaced the plugs, mass air meter, fuel filter, checked injectors and coil packs and drove it about 400 miles.
still have check engine light, they told me it would be back, they could not get rid of it.
car says stability control in the little area
fault codes
p0300 random misfire, tech states car runs fine.
p0301 cyla1
p0302cyl a2
etc all the way to p0308.
permanent p1316 misfire rate
p1316 misfire rate
pending p1000 system check not completed since last memory clear
any ideas?????
still have check engine light, they told me it would be back, they could not get rid of it.
car says stability control in the little area
fault codes
p0300 random misfire, tech states car runs fine.
p0301 cyla1
p0302cyl a2
etc all the way to p0308.
permanent p1316 misfire rate
p1316 misfire rate
pending p1000 system check not completed since last memory clear
any ideas?????
Thread Starter
|
Senior Member
Joined: Sep 2016
Posts: 203
Likes: 32
xk8 1999 fault codes
got the car back from the shop, they replaced the plugs, mass air meter, fuel filter, checked injectors and coil packs and drove it about 400 miles.
still have check engine light, they told me it would be back, they could not get rid of it.
I want to thank all of you for your welcomes. I was asked by at least two of you to tell the fault codes, well here they are, i am still waitint for information about which scanner tool works on this exact car, if anyone knows? Thanks
car says stability control in the little area
fault codes
p0300 random misfire, tech states car runs fine.
p0301 cyla1
p0302cyl a2
etc all the way to p0308.
permanent p1316 misfire rate
p1316 misfire rate
pending p1000 system check not completed since last memory clear
any ideas?????
still have check engine light, they told me it would be back, they could not get rid of it.
I want to thank all of you for your welcomes. I was asked by at least two of you to tell the fault codes, well here they are, i am still waitint for information about which scanner tool works on this exact car, if anyone knows? Thanks
car says stability control in the little area
fault codes
p0300 random misfire, tech states car runs fine.
p0301 cyla1
p0302cyl a2
etc all the way to p0308.
permanent p1316 misfire rate
p1316 misfire rate
pending p1000 system check not completed since last memory clear
any ideas?????
Thread
Thread Starter
Forum
Replies
Last Post
XJR-Guy
New Member Area - Intro a MUST
12
Sep 16, 2016 04:24 PM
NewJagOwnerInToronto
S-Type / S type R Supercharged V8 ( X200 )
17
Nov 14, 2013 04:41 PM
04XJ8
PRIVATE For Sale / Trade or Buy Classifieds
2
Aug 28, 2012 07:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)