Jaguar x type Misfire
Thread Starter
|
Junior Member
Joined: May 2017
Posts: 1
Likes: 0
From: Pittsburgh
Jaguar x type Misfire
Hello i need some help A$AP my 04 jaguar x type has a misfire on cylinders 2-6 looses power when under load. and stutters i have been trying to figure out the problem for months now i replaced the camshaft sensors crankshaft sensors spark plugs & Coils 4 months ago. Ignition coils 6 months ago. Codes:P0174 Too lean Bank 2
p0171, P1314, p0356,
P0455, P1314 , p01314
p1111
Joined: Dec 2011
Posts: 120,439
Likes: 17,005
From: Durham, UK
Welcome to the forum Jagxnate,
Good to have you with us at Jaguar forums.
The error codes are:
P0171 : Bank 1 combustion too lean
P0174 : Bank 2 combustion too lean
P0356 : Ignition module primary circuit malfunction – cylinder 6
P0455 : EVAP system leak detected – large
P1314 : Misfire rate catalyst damage – bank 2
Code P1111 is not an error. It is a status code indicating OnBoard Monitoring tests have been completed since the last memory clear. You will always see either this or P1000 if the Tests have not been completed.
Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Northeast Region forum by following this link https://www.jaguarforums.com/forum/us-northeast-35/ to find other members in your region.
Enjoy the forums.
Graham
Good to have you with us at Jaguar forums.
The error codes are:
P0171 : Bank 1 combustion too lean
P0174 : Bank 2 combustion too lean
P0356 : Ignition module primary circuit malfunction – cylinder 6
P0455 : EVAP system leak detected – large
P1314 : Misfire rate catalyst damage – bank 2
Code P1111 is not an error. It is a status code indicating OnBoard Monitoring tests have been completed since the last memory clear. You will always see either this or P1000 if the Tests have not been completed.
Follow this link https://www.jaguarforums.com/forum/x-type-x400-14/ to the X-Type forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues.
Please remember to add vehicle details to your Signature to help others to give relevant advice. Go to the User CP button on the left of the top menu bar, then Settings & Options under Your Control Panel. Select Edit Signature and enter the details.
You can also visit the US Northeast Region forum by following this link https://www.jaguarforums.com/forum/us-northeast-35/ to find other members in your region.
Enjoy the forums.
Graham
Last edited by GGG; May 20, 2017 at 09:36 AM.
Joined: Oct 2007
Posts: 121,009
Likes: 6,649
From: PHX some of the time
Welcome to Jaguar Forums Jagxnate,
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
Good to have you with us.
Enjoy the forum.
If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help
