Hi,

While changing driver side amber turn signal bulb, I accidentally dropped the old bulb into the headlamp assembly (which fell to the bottom and is still visible). After some looking and reading, I came to the conclusion that the bumper and grille and a few other items must be R&R'd to get the headlamp out.

I tried a goose neck grabber and a few other things, without success. Please tell me that someone has an easier solution!

This is my first post, so any advice on not following protocol or providing other info is much appreciated. I feel like I'm applying for a CIA position

Any help is much appreciated!

Thanks much,

Boog in Tucson

2004 S 3.0

 

i had that problem before to i put some a small bit of two sided tape on a lil rob and pulled it out with that you can try and see if it will help you let me know if you got it out or not

 

OK. I'll try that in the morning if you'll tell me what a 'lil rob' is? Much appreciated. Boog

 

WElcome, please let's not criticise forum rules , btw for more questions make sure you check out FAQs page on S Type

 

Thanks for the welcome. Which rules have I criticized? Did not intentionally and was not aware that I criticized anything.