having a engine fault show on dash i plugged my reader in but no power so thought id get a new reader as it is old. Tried new reader still no power, i checked fuse 43 and it had blown fuse 16 was ok.when i switched the ignition back on the car wouldnt turn over the steering lock came on and the mirrors folded in when i used the key fob. So i disconnected the battery and checked the fuses again both f43 and f16 seem ok so reconnected the battery and everything is ok the car runs as normal with no faults on the dash But still no power to the obd2 socket help needed please

 

I suggest a repost in the X350 Tech Section, down the Home Page a tad further.

 

Welcome to the forums Gordon,

Good to have you with us.

Follow this link https://www.jaguarforums.com/forum/x...-x350-x358-28/ to the X350 forum for help, advice and information. The 'HOW TO' thread at the top is a good place to start for information on regular issues. You can also use the UK & Eire Region forum by following this link https://www.jaguarforums.com/forum/uk-eire-68/ to find other members in your region.

Please read the guidance for new members ( https://www.jaguarforums.com/forum/n...ned-up-241802/ ) which answers many of the most frequent questions about getting started.

Enjoy the forums.

Graham

 

thank you trying to find my way round the site cheers gordon

 

welcome to the forum - enjoy!!

 

Hello, Gordon,
Welcome to the forums from ElinorB.
(';')

 

Welcome aboard Gordon.

 

Welcome to Jaguar Forums Gordon,

Good to have you with us.
Enjoy the forum.

If you haven't done so already you should add your car details to your signature to help others to help you.
If you need help with getting around and using the forum follow this link for some help Forum Help

 

Welcome to the forums.