i installed this screen in my x-type but its made for a s-type heres my 4 part series
the s-type and xj dont have to modify anything its plug and play for you guys
purchased here https://www.canavie.com/s-jaguar



PART-1

PART-2

PART-3


PART-4

 

Nice work Dennis . Very informative. Great series.

 

Thanks ,it keeps the jaguar look ,but gives up to date technology, its great when you take a trip

 

bench test before install

 

This may be a silly question but can this be retrofitted on a, say, '04 XJR that does NOT have the Nav unit or do you have to have the Nav unit to start on this endeavor?

 

My buddy was just asking me that as I have the same setup.

 

Replying to an old post here...hope everyone's still here;

I bought a 2006 3.0 S-Type with the same set-up already installed. In my car the thing doesn't work properly, the side buttons for the climate system really don't work, and I have doubts about the touchscreen buttons working properly in relation to the various climate settings.

I've gone through the settings, including the factory settings, but I can't seem to find a place to adjust the side buttons. I have fiddled with the CAN-bus model selection. In the settings there is no option for a Jaguar S-type, but from what I have gathered from searching online, you should be able to use the Jaguar F-type model.

Does anyone have any idea how to get it to work?

 

I figured it out, thought I share my findings.

If the side panel buttons fail, you can reset the device by using a pin in the bottom hole on the lift hand side. Press it for a couple of secs an the thing should restart... That fixed it for me.
The correct can-bus type can be set by selecting the F-Type (the S-type is not included as an option). The code for getting to the factory settings is 3368.