please help me
Thread Starter
|
Junior Member
Joined: Jun 2015
Posts: 2
Likes: 0
please help me
i have a 2003 jaguar s type 4.2l. it is not responsive to acceleration and the check engine light is flashing with the dash reading restricted performance. i am pulling these codes
P0174
P0300
P0301
P0302
P0304
P0305
P0306
P0307
P0308
P1313
P1314
P1316
P1000
P1646
This is driving me up a wall and i cannot for the life of me figure it out.
P0174
P0300
P0301
P0302
P0304
P0305
P0306
P0307
P0308
P1313
P1314
P1316
P1000
P1646
This is driving me up a wall and i cannot for the life of me figure it out.
Veteran Member
Joined: Feb 2009
Posts: 8,020
Likes: 1,731
From: Sunny South Carolina
There is a vacuum leak code and looks like every cylinder is misfiring. I would start off check the airbox lid to make sure it is properly seated. They are a known PIA if owners short cut the removal and install. I would also take a look at the MAF sensor located right after the air box lid in the cold air intake tube. Be aware sometimes just cleaning them will help but the majority of the time replacement is needed.
Oh and welcome to the forum!
I asked the mod team to delete your double post in another thread. You posted in a V6 discussion about your 4.2. While you are waiting for more ideas to resolve your issues. I would head over to the "New Member" area and properly introduce yourself to the community per forum protocol. Next to better us help you, help us. Go to any forum page, in the near upper left corner click on "UserCP", scroll down to "Edit Signature" ad your vehicle details such as year, engine etc...click "Save". Your vehicle details will be saved as so many other members here for quick reference. Bobs your Uncle
Oh and welcome to the forum!
I asked the mod team to delete your double post in another thread. You posted in a V6 discussion about your 4.2. While you are waiting for more ideas to resolve your issues. I would head over to the "New Member" area and properly introduce yourself to the community per forum protocol. Next to better us help you, help us. Go to any forum page, in the near upper left corner click on "UserCP", scroll down to "Edit Signature" ad your vehicle details such as year, engine etc...click "Save". Your vehicle details will be saved as so many other members here for quick reference. Bobs your Uncle
Last edited by joycesjag; Jun 11, 2015 at 09:17 PM. Reason: noob
Joined: Jan 2012
Posts: 6,068
Likes: 2,983
From: Newport Beach, California
Do not operate the vehicle under conditions that cause the MIL to flash as catalyst damage is occurring!
Locate and resolve the vacuum leak(s) before you destroy both catalytic converters.
Locate and resolve the vacuum leak(s) before you destroy both catalytic converters.
Joined: Dec 2011
Posts: 120,439
Likes: 17,006
From: Durham, UK
I've deleted your duplicate post in a thread about the 3.0 litre model.
Please follow this link New Member Area - Intro a MUST - Jaguar Forums - Jaguar Enthusiasts Forum to the New Member Area - Intro a MUST forum and post some information about yourself and your Jaguar for all members to see. In return you'll get a prper welcome and some useful advice about posting to the forum.
Graham
