Thinking of putting on 07+ XJ/KF/XK chrome side vents on my STR...Pix
If you don't like them, I don't care, yet if you choose to voice your opinion I won't stop you...I like cerebral debate and will stick to my guns 
They're stick on and clearly non-functional; doing some research, all the OEM Jags that come stock with them are also all non-functional.
The main problem appears to be exactly where to place them...If I could remove the fender marker lens and place the stick-on vents over holes, I'm not sure if they'll fully cover the holes. Also which would you recommend?



They're stick on and clearly non-functional; doing some research, all the OEM Jags that come stock with them are also all non-functional.
The main problem appears to be exactly where to place them...If I could remove the fender marker lens and place the stick-on vents over holes, I'm not sure if they'll fully cover the holes. Also which would you recommend?

I'd be interested to see how they turn out too....Personally I think if done to a very high std they could look quite good
oh god please noooo!!. Anything not already factory "stuck" onto your car should not be added.. just my opinion but I think its one of the worst offenses. I live in an area that has quite a bit of shall we say "culture" and this has to be one of the most prevelant attrocities. Anywhere from a corolla to a buick to a BMW. Everyone is sticking these side vent things on their fenders and even other places. I just looks so ridiculous. SO many manufacturers are doing this now..even kia and hyundai...most factory ones dont even look good to me.. but thats just me.
its kind of tantamount to buying a BMW 318 and putting M3 badging allover it.
enough of my rambling.......
its kind of tantamount to buying a BMW 318 and putting M3 badging allover it.
enough of my rambling.......
Last edited by fergs03R; Jul 21, 2011 at 06:19 PM. Reason: spelling
A homeless guy said to me one day that "good design is a process of subtraction not addition" and then bummed a smoke and asked for directions to nearest 4 star restaurant...
Trending Topics
I think they have kind of been overdone to be honest.
If you do proceed, I would avoid covering the marker light and your R badge. So they would have to go between those and the door.
Body color would be my suggestion to make them blend in a bit better.
If you do proceed, I would avoid covering the marker light and your R badge. So they would have to go between those and the door.
Body color would be my suggestion to make them blend in a bit better.
Bacardi 151,
What if you wanted to remove these later? Would there be any risk of paint coming off with the sticky tape?
Also, think longer term - do you really foresee these being on the car 5 years from now? Do you think that the novelty is going to wear off?
Just some things to consider. I've done stuff like this to my cars and I've always come back full circle to removing. The short term excitement and novelty eventually wears off and you yearn for going back to basics and originality.
- Michael
2007 Jaguar S-type 3.0 Golden Cat
What if you wanted to remove these later? Would there be any risk of paint coming off with the sticky tape?
Also, think longer term - do you really foresee these being on the car 5 years from now? Do you think that the novelty is going to wear off?
Just some things to consider. I've done stuff like this to my cars and I've always come back full circle to removing. The short term excitement and novelty eventually wears off and you yearn for going back to basics and originality.
- Michael
2007 Jaguar S-type 3.0 Golden Cat
After really looking at it, I'm going to pass...There's no way to have it look acceptable without bodywork due to the marker lens...You either need to fill in the marker hole or even cut a slot which may cost the same as filling in the marker hole...
Doesn't have to even be a bolt on addition. My buddy has a stock Toyota Tacoma that came with a non-functional hood scoop. Never got that really.
Jeremy over on the X Type forums put XJ vents on his X. https://www.jaguarforums.com/forum/x...rpc-jag-34484/
I think he bent them a little to curve with the surface.
Again I'm not a fan of it and I think you made the right call, but if you were gonna do it here is some info.
Jeremy over on the X Type forums put XJ vents on his X. https://www.jaguarforums.com/forum/x...rpc-jag-34484/
I think he bent them a little to curve with the surface.
Again I'm not a fan of it and I think you made the right call, but if you were gonna do it here is some info.
Doesn't have to even be a bolt on addition. My buddy has a stock Toyota Tacoma that came with a non-functional hood scoop. Never got that really.
Jeremy over on the X Type forums put XJ vents on his X. https://www.jaguarforums.com/forum/x...rpc-jag-34484/
I think he bent them a little to curve with the surface.
Again I'm not a fan of it and I think you made the right call, but if you were gonna do it here is some info.
Jeremy over on the X Type forums put XJ vents on his X. https://www.jaguarforums.com/forum/x...rpc-jag-34484/
I think he bent them a little to curve with the surface.
Again I'm not a fan of it and I think you made the right call, but if you were gonna do it here is some info.
Too tall and I don't see enough area there to pull it off properly.
Why not buy the real thing?
It's still a bit tall IMHO.
I personally think all the random chrome bits on the car look terrible, especially when people have chrome mirrors.
Maybe I should replace my R badge with a 3.0, or better yet find a 2.7 diesel!
Maybe I should replace my R badge with a 3.0, or better yet find a 2.7 diesel!









