XJ XJ6 / XJR6 ( X300 ) 1995-1997

Mystery plastic panel and weird battery cable end

Thread Tools
 
Search this Thread
 
Old Oct 24, 2016 | 11:49 PM
  #1  
JensenHealey's Avatar
Thread Starter
|
Senior Member
10 Year Member
Liked
Joined: Sep 2013
Posts: 518
Likes: 176
From: NE Ohio, USA
Default Mystery plastic panel and weird battery cable end

So wandering around loose under the bonnet of my 1997 XJ6 is this mystery plastic panel. It has two plastic clips at the top of the panel and the edges curve around to the sides.

Anyone have any clue what it is?



Mystery plastic panel wandering around loose under the bonnet on left hand side of the engine compartment.


Also on the end of the positive cable of the battery is this weird end which I have never seen before and I do not understand how it is supposed to actually clamp to the battery post. Anyone have any clues about this?



Weird battery cable end with no way to clamp to post
 
Reply
Old Oct 25, 2016 | 01:32 AM
  #2  
countyjag's Avatar
Veteran Member
Joined: Oct 2014
Posts: 1,092
Likes: 539
From: Scotland
Default

The plastic trim sits over the end of the air box, and attaches to the front slam panel.
The battery terminal looks like some sort of quick release mechanism, but it is difficult to tell from the photo.
 
Reply
Old Oct 25, 2016 | 02:44 AM
  #3  
GGG's Avatar
GGG
10 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2011
Posts: 120,439
Likes: 17,004
From: Durham, UK
Default

Originally Posted by JensenHealey
.... Weird battery cable end with no way to clamp to post
Possibly an aftermarket 'quick release' battery clamp. A Google search brings up a variety of designs.

Graham
 
Reply
Old Oct 25, 2016 | 08:45 AM
  #4  
JensenHealey's Avatar
Thread Starter
|
Senior Member
10 Year Member
Liked
Joined: Sep 2013
Posts: 518
Likes: 176
From: NE Ohio, USA
Default

So what does a factory positive battery terminal end look like? Anyone have a photo of that? I will try to get a better photo of this setup here today. There are several wires that are bolted to the part of the terminal that wraps down around the side of the battery. so I assume on a factory setup there is some way of doing that as well.
 
Reply
Old Oct 25, 2016 | 09:11 AM
  #5  
motorcarman's Avatar
Joined: Dec 2009
Posts: 13,644
Likes: 9,579
From: Wise County,TX
Default

The bottom of the clamp has a VEE that pulls the split together. The bolt in the hole pulls the VEE UP and clamps the ends.

You are missing the bolt and VEE part.

bob
 
Reply
Old Oct 31, 2016 | 09:35 AM
  #6  
SD96XJ6L's Avatar
Senior Member
Joined: Nov 2014
Posts: 333
Likes: 74
From: SoCal
Default

That plastic piece goes over the air intake box and clips into the large radiator support with all the torx bolts int it.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:15 PM.