Aftermarket Side skirt?
#1
#2
![Default](/forum/images/icons/icon1.gif)
#3
![Default](/forum/images/icons/icon1.gif)
Ouch! The picture is of the "sports design pack". My car came with it (it was a demo). The front and rear treatment is good but the skirt is a PITA because it is way too wide and makes it harder getting out of the car, it is flat so the dirt sits on it and makes mud splotches, and it takes away from the lines of the car.
On the other hand, some people think it looks aggressive.
I had mine wrapped, and it looks acceptable. It was a $4000 odd option, I think, though I didnt count it as a plus when I bought the car.
On the other hand, some people think it looks aggressive.
I had mine wrapped, and it looks acceptable. It was a $4000 odd option, I think, though I didnt count it as a plus when I bought the car.
#4
#6
![Default](/forum/images/icons/icon1.gif)
#7
![Default](/forum/images/icons/icon1.gif)
That piece in the photo certainly looks like a poorly conceived aftermarket unit. The OEM skirts will bolt up to an unskirted car and can be ordered from Land Rover Parts and Jaguar Spares Britcar UK Ltd. You will need to choose from the smaller 2013-14 skirts (EU MY) or the exaggerated 2015+ skirts.
Trending Topics
#8
![Default](/forum/images/icons/icon1.gif)
Wrap them in flat black so you don't notice them as much (or just leave them off). If they offered a vertical soft rubber skirt to enhance the ground effects, I could be tempted. I used to fabricate my own skirts for my race cars (and they looked like it too).
#9
![Default](/forum/images/icons/icon1.gif)
You need to contact them (contact page) and tell them exactly what you want. They will then send you the part number(s) that you can enter online for pricing and ordering.
The following users liked this post:
Panthro (12-09-2016)
#12
![Default](/forum/images/icons/icon1.gif)
That does look sharp. I like it!
The following users liked this post:
BruceTheQuail (12-06-2016)
#13
The following 2 users liked this post by DJS:
BruceTheQuail (12-06-2016),
Mbourne (12-06-2016)
#14
The following users liked this post:
Mbourne (12-06-2016)