Your Thoughts on Compressors????
Have a 2012 XF 5.0. Use to belong to pdupler on the forum.
Having the apparent DPS issue. Had the refrigerant level checked yesterday. If I run at above 1500 rpms's the air from the vents floats at around 35 degrees. Go sit at a stop light and it runs up to 55-60.
Not going to waste time to get the valve when getting a new compressor makes quicker and better sense.. I have zero intention of paying Jag some $1150-1300 for a Sanden that I could get for $345- exact same model, but somewhat hesitant due to some of the issues that clubairth1 had with his with changes that got made that he had to adjust for. https://www.jaguarforums.com/forum/x...emoval-273776/
I have always liked NISSENS and see that some at Rock like the GPD (but I don't know them).
Thoughts from anyone on the compressor they would get and why? I have a PXE16.
Thanks
Tom in Dallas/Plano
https://www.usacparts.com/product/sa...8105-lr056364/
https://www.rockauto.com/en/catalog/...ompressor,6628
Having the apparent DPS issue. Had the refrigerant level checked yesterday. If I run at above 1500 rpms's the air from the vents floats at around 35 degrees. Go sit at a stop light and it runs up to 55-60.
Not going to waste time to get the valve when getting a new compressor makes quicker and better sense.. I have zero intention of paying Jag some $1150-1300 for a Sanden that I could get for $345- exact same model, but somewhat hesitant due to some of the issues that clubairth1 had with his with changes that got made that he had to adjust for. https://www.jaguarforums.com/forum/x...emoval-273776/
I have always liked NISSENS and see that some at Rock like the GPD (but I don't know them).
Thoughts from anyone on the compressor they would get and why? I have a PXE16.
Thanks
Tom in Dallas/Plano
https://www.usacparts.com/product/sa...8105-lr056364/
https://www.rockauto.com/en/catalog/...ompressor,6628
Last edited by jazzwineman; Yesterday at 10:31 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Tiepolo
XK / XKR ( X150 )
15
Sep 13, 2023 06:54 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)







